How does Disecq work with BDA devices?
Moderators: Dreamer, FredB, X05
Yesssssssssssssssssss I confirm it works perfectly with my Cinergy 1200 DVB-S !!!
Thanks a lot, Rel, for this great implementation of this new DiseqC method
@Philou : What the revision of your card ? Mine is a X4b. Thanks for the inquiry about DiseqC with Cinergy 1200 DVB-S.
Thanks a lot, Rel, for this great implementation of this new DiseqC method
@Philou : What the revision of your card ? Mine is a X4b. Thanks for the inquiry about DiseqC with Cinergy 1200 DVB-S.
Forum PCTVSat : http://pctvsat.free.fr
-----------------------------------------------------------------------
Pinnacle PCTV Sat + Terratec Cinergy 1200 DVB-S / Athlon 64 3500+ - 2048 Mb DDR - GeForce 7900 GS
Twinhan Vision Plus 1030A + Asus Europa II Hybrid / PIV D920 2x2.8 Ghz - 2048 Mb DDR2 - GeForce 7600 GS
PCTV Sat Pro PCI (PCTV 450i) + DVICO Fusion HDTV USB / Athlon XP 3200+ - 1024 Mb DDR - GeForce 6600GT
-----------------------------------------------------------------------
Collective installation with 2 LNB Quad and multiswitches DiseqC - LNB A = Astra 19.2°E - LNB B = Hotbird 13.0°E - Commutation = 13V/18V/22K + DiseqC 2.0
-----------------------------------------------------------------------
Pinnacle PCTV Sat + Terratec Cinergy 1200 DVB-S / Athlon 64 3500+ - 2048 Mb DDR - GeForce 7900 GS
Twinhan Vision Plus 1030A + Asus Europa II Hybrid / PIV D920 2x2.8 Ghz - 2048 Mb DDR2 - GeForce 7600 GS
PCTV Sat Pro PCI (PCTV 450i) + DVICO Fusion HDTV USB / Athlon XP 3200+ - 1024 Mb DDR - GeForce 6600GT
-----------------------------------------------------------------------
Collective installation with 2 LNB Quad and multiswitches DiseqC - LNB A = Astra 19.2°E - LNB B = Hotbird 13.0°E - Commutation = 13V/18V/22K + DiseqC 2.0
@ rel
Can you add the
TerraTec Cinergy 1200 DVB-S
TerraTec S USB
cards on this page please, please? http://dvbdream.org/supported_devices.php
they work perfect with DVB Dream 1.3c, too
ps: thank you for the new version but the title bar says: 1.3b
Can you add the
TerraTec Cinergy 1200 DVB-S
TerraTec S USB
cards on this page please, please? http://dvbdream.org/supported_devices.php
they work perfect with DVB Dream 1.3c, too
ps: thank you for the new version but the title bar says: 1.3b
-
- Not too shy to talk
- Posts: 12
- Joined: Sun Dec 10, 2006 5:54 pm
diseqc and bda drivers
hi i have fly dvb trio, i can't find anywhere the code of diseqc, my card have a philips saa713x for dvb-s my disecq don't work try yours procedure?
lbn 1 have hotbird
lbn 2 have astra 1b1h2c
someone case don't appears a signal bar and quality bar
on my flydvb trio cardbus , i have dvbdream 1.3c
best regards
Only Juventus it's a better soccer team
bye supertecnico
B come Berlino!
lbn 1 have hotbird
lbn 2 have astra 1b1h2c
someone case don't appears a signal bar and quality bar
on my flydvb trio cardbus , i have dvbdream 1.3c
best regards
Only Juventus it's a better soccer team
bye supertecnico
B come Berlino!
flydvb trio carbus skystar2 4.31 twinhan vision dtv
As Philou5 done for Terratec Cinergy 1200 DVB-S, try to contact the manufacturer of your DVB card to obtain informations about DiseqC switching with this card.
Forum PCTVSat : http://pctvsat.free.fr
-----------------------------------------------------------------------
Pinnacle PCTV Sat + Terratec Cinergy 1200 DVB-S / Athlon 64 3500+ - 2048 Mb DDR - GeForce 7900 GS
Twinhan Vision Plus 1030A + Asus Europa II Hybrid / PIV D920 2x2.8 Ghz - 2048 Mb DDR2 - GeForce 7600 GS
PCTV Sat Pro PCI (PCTV 450i) + DVICO Fusion HDTV USB / Athlon XP 3200+ - 1024 Mb DDR - GeForce 6600GT
-----------------------------------------------------------------------
Collective installation with 2 LNB Quad and multiswitches DiseqC - LNB A = Astra 19.2°E - LNB B = Hotbird 13.0°E - Commutation = 13V/18V/22K + DiseqC 2.0
-----------------------------------------------------------------------
Pinnacle PCTV Sat + Terratec Cinergy 1200 DVB-S / Athlon 64 3500+ - 2048 Mb DDR - GeForce 7900 GS
Twinhan Vision Plus 1030A + Asus Europa II Hybrid / PIV D920 2x2.8 Ghz - 2048 Mb DDR2 - GeForce 7600 GS
PCTV Sat Pro PCI (PCTV 450i) + DVICO Fusion HDTV USB / Athlon XP 3200+ - 1024 Mb DDR - GeForce 6600GT
-----------------------------------------------------------------------
Collective installation with 2 LNB Quad and multiswitches DiseqC - LNB A = Astra 19.2°E - LNB B = Hotbird 13.0°E - Commutation = 13V/18V/22K + DiseqC 2.0
Please tell me how to configure AltDVB v2.1 to work with my second LNB (1 - Astra, 2 - Hotbird). The card is hauppauge DVB-s (Skystar 1).
I should note that when i tried AltDVB with skystar 2, i got configuration window for adding diseqc and lnb2, which i cannot find when using AltDVB with my card.
Thanks!
I should note that when i tried AltDVB with skystar 2, i got configuration window for adding diseqc and lnb2, which i cannot find when using AltDVB with my card.
Thanks!
Hauppauge DVB-s rev1.3
Windows XP
Windows XP
-
- Not too shy to talk
- Posts: 12
- Joined: Sun Dec 10, 2006 5:54 pm
disecq flydvb trio Saa7135hl philips
I find to anywhere the raw disecq code for my card, i can't found them, some other card use this chipset??
Saa7135 philips? for cut and past the raw disecq code?
similar card??? i try other bda drivers but don't work
Saa7135 philips? for cut and past the raw disecq code?
similar card??? i try other bda drivers but don't work
flydvb trio carbus skystar2 4.31 twinhan vision dtv
I have a Creatix CTX948 Hybrid tuner (terrestrial/Cable/Satellite) feeding from a monoblock LNB (Astra 19.2 & Hotbird 13) and have been having the same Diseqc problem as others in this thread.
Creatix finally came back to me with the following information about how their driver handles Diseqc. Is this of any help in getting DVBDream talking to my card ?
Creatix finally came back to me with the following information about how their driver handles Diseqc. Is this of any help in getting DVBDream talking to my card ?
Thanks in anticipation...It is a property supported by Microsoft and is implemented on the
"Frequency Filter Interface" of our Digital Tuner Filter.
IBDA_FrequencyFilter::put_Range
Below is a code drop how to access the "InputRange" property from any
DirectShow application.
.....
.........
hr = m_pDVBTuneRequest->put_ONID(-1);
hr = m_pDVBTuneRequest->put_TSID(-1);
hr = m_pDVBTuneRequest->put_SID(servicePID);
hr = m_pITuner->put_TuneRequest(m_pDVBTuneRequest);
// access the InputRange property directly
USHORT usRange = 0;
// set input range (option and position)
usRange = pDVBSettings->option;
usRange <<= 8;
usRange += (UCHAR)pDVBSettings->position;
PutTunerInputRange(usRange);
.........
.....
Make sure you make the "InputRange" access AFTER you send the tune
request.
The call of the "PutTunerInputRange" function performs a re-tune with all
parameters previously passed to the driver.
Changing the property together with the other DVB related properties does
not work, because the NetworkProvider always
overwrites the "InputRange" Property with -1.
So I make the "InputRange" change after I finished the tuning with the
Microsoft components.
The source code for the function "PutTunerInputRange" is attached as .cpp
file to this mail.
If you need more information, please contact me again.
That is exactly a DiSEqC Multiswitch for two LNBs and 8 clients.
The meaning of position and option is as follows:
| option position
=======+==============
LNB A | 0 0
LNB B | 0 1
LNB C | 1 0
LNB D | 1 1
The "InputRange" property contains only the two bits 'option' and
'position' coded
as shown above.
Where 'position' is at bit position 0 (LSB) and 'option' is at bit
position 8 (LSB of the second byte) of the DWORD variable.
That means
- for LNB A you must set 'InputRange' to 0x00000000
- for LNB B you must set 'InputRange' to 0x00000001
- for LNB C you must set 'InputRange' to 0x00000100
- for LNB D you must set 'InputRange' to 0x00000101
The driver then extracts the two bit out of the 'InputRange' property
value and uses this information
to build the DiSEqC command that will be transmitted on the antenna feed.
If you don't have a switch, don't care. The DiSEqC transmission does not
disturb a LNB that is connected directly to your
tuner board.
The DiSEqC transmission is repeated 3 times, so that 3 levels (cascades)
of switches are supported as well.
Creatix CTX948 (OEM Medion - BDA !), MCE2005, Nvidia 7650GS, Monoblock LNB (Astra 19.2 Hotbird 13)
Diseqc for KWORLD DVB-S100
Hi!
I have a Kworld DVB-S100 and its working fine except for changing the Diseqc port. I am using DD version 1.3c. I read all the BDA related notes and tried the latest BDA patch. I also tried the RAW Diseqc commands with no switch and have not been able to succeed. Does any one have additional insight on what might work. The card has a Connexant chip. Is the patch that I used from this thread good for other cards also? What type of information would I need to provide to get a similar patch - not sure exactly what was modified in the patch.
Thanks
I have a Kworld DVB-S100 and its working fine except for changing the Diseqc port. I am using DD version 1.3c. I read all the BDA related notes and tried the latest BDA patch. I also tried the RAW Diseqc commands with no switch and have not been able to succeed. Does any one have additional insight on what might work. The card has a Connexant chip. Is the patch that I used from this thread good for other cards also? What type of information would I need to provide to get a similar patch - not sure exactly what was modified in the patch.
Thanks
KWORLD-DVB-S100
Who is online
Users browsing this forum: Bing [Bot] and 1 guest