Twinhan problems with HDTV and Diseqc

[robertkal]

Hello. I have two problems with my Starbox 2 (twinhan 7021A).
1) When I'm scaning satellites can't see transponders with HDTV channels quality and level drop to 0. I think about dishnetwork transponders like ehostar 3 freq. TP 12224, 12239, 12253, 12501 for search I'm using parameters from http://www.lyngsat.com/packages/dish61.html but can't find any HDTV channels my satielities configuration is LOF-1 11250 LOF2 11250 LOFSW 0 KU Universal. If any one know what is wrong with taht please help me.
2) Second problem is with diseqc When I plug in diseqc switch only mytheater can change satelities dvbdream cant change. I have 4 separate LNB on 2 antennas on dish 1000 satelities echo star 110 119 129 and dish 500 61.5. If I plug in straight every thing working but when I use diseqc sw chan change satielities and working only one LNB. I try 2 new switches on both it is the same situation.
Please Help. Tthankfully robertkal

[genpix]

1) Twinhan cards don't work with Turbo-FEC (DN uses Turbo-FEC for their HD cahnnels). Even more, if you look closely to Lingsat description, you would see that these TPs are 8PSK (your twinhan card works with QPSK only).

2) Do you use BDA driver? Could be that diseqc commands for your BDA driver have not implemented yet in DD (standard BDA driver does NOT inclde diseqc protocol at all; thus, diseqc commnads use non-standard calls and are diferent for different BDA drivers)

[robertkal]

Your advice change card, say me what card I need so I don't have problem with HDTV and qiseqc?