DvbDream Community

Hi.

I bought the KWorld 310U a few days ago and set it up with the hypervision software supplied. It works to an extent (I can watch tv at decent quality, decent signal (~70-80%) and get all the UK freeview dvb channels) but the rest of the program leaves a lot to be desired (general interface, EPG etc).

I saw the 310U on the supported devices page so i thought I'd try it out. I set it up using the drivers on the KWorld CD and selected the BDA Terrestrial drivers when prompted. I selected the UK profile for frequencies (they match up with the hypervision frequencies) and set it to scan. Unfortunately it wouldent pick up any channels at all.

I remeber reading somewhere on this forum that DVB-T wasn't working on some devices on my various searches so I thought I would post before I go back to the hypervision software. Any help would be appreciated!


EDIT: I'm using 1.3c

I have exactly the same problem.
I had a Hauppauge HVR-900 dvb-t usb stick but could not get it to work with dvb dream, so I bought a Kworld 310U which is included on the supported devices, but I can't get any channels scanned either.

Anybody happened to make it work?

I read on a forum that Hybrid devices (analog/digital) like these, have an issue with dvbdream which tries to initialize the tuner in analog mode instead of digital, so no signal can be detected that way.

Is it true? Is there a workaround for that?