While using an SS2 (with MIBIs driver) or an TwinHan 1030D-CI, steering the dish for multiple pre-stored SATs is no problem in version 1.2e.
But using USALS is not possible. With the SS2, RAW-command appears in the box, but nothing happens.
Trying the TH1030, an error appears 'This command is not supported on TwinHan device yet'.
Why ?
With my own Stand-Alone-USALS-Tool, it works fine - also a derive MD-Plugin for ProgDVB.
But there is no function at all when loading the Plugin to DD.
What's happened with DiSeqC-Support ?
Probs with steering my dish using USALS
.
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
I also tried a little modul programmed with Delphi 6.
Sending various DiSeqC-Commands to DD won't work either.
Sending various DiSeqC-Commands to DD won't work either.
.
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
hi,But using USALS is not possible. With the SS2, RAW-command appears in the box, but nothing happens.
did you try with both of "Generic" and "Stab" motor type?
does Mibi's plugin work fine?
support for USALS commands are not implemented yet on twinhan device interface yet. no documentation available from Twinhan for programmers to implement raw diseqc. (WDM drivers)
DVB Dream - because I have to dream about having time to code it
I've tried a lot...
With TwinHan, i tried drivers for TH-Direct and TH-SDK (Where's the difference ?).
It doesn't matter, wich motor is selected under Positioner (execpt Geotrak - no USALS available) >> Error is still the same.
But automatic steering from e.g. 19.2 to 23.5 while selecting an aother prgramm still works fine ! And motor drives very fast !
Using SS2 and MIBIs driver/plugin 1.9 won't work anyway here... No Function at all.
What kind of information do you have/need for TwinHan and/or DiSeqC 1.2 ? I've got some doc's here...
With TwinHan, i tried drivers for TH-Direct and TH-SDK (Where's the difference ?).
It doesn't matter, wich motor is selected under Positioner (execpt Geotrak - no USALS available) >> Error is still the same.
But automatic steering from e.g. 19.2 to 23.5 while selecting an aother prgramm still works fine ! And motor drives very fast !
Using SS2 and MIBIs driver/plugin 1.9 won't work anyway here... No Function at all.
What kind of information do you have/need for TwinHan and/or DiSeqC 1.2 ? I've got some doc's here...
.
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
If you cant get USALS to work with MIBI plugin, I dont think there will be a way to use SS2 with USALS.
Twinhan SDK device might work in v1.3 with USALS. There will be minor change to allow it to work.
manufacturer API documentations , SDKs with Raw Diseqc supportWhat kind of information do you have/need for TwinHan and/or DiSeqC 1.2 ? I've got some doc's here...
Check the DD FAQ.With TwinHan, i tried drivers for TH-Direct and TH-SDK (Where's the difference ?).
Twinhan SDK device might work in v1.3 with USALS. There will be minor change to allow it to work.
DVB Dream - because I have to dream about having time to code it
Who is online
Users browsing this forum: No registered users and 1 guest