DVBDream V1.4i C-Band tuning

oldest posts, i.e. the issues probably dont exists or not valid anymore for the up-to-date DD version. Please let us know if the problems still exist.

Moderators:Dreamer, FredB

Post Reply
selvam
Just popping in
Posts:6
Joined:Thu Dec 13, 2007 9:31 am
DVBDream V1.4i C-Band tuning

Postby selvam » Wed Nov 26, 2008 11:50 pm

Dear All,
I am using DVBDream 1.4i with Skystar-2 V2.6d PCI Card.
In my location most of the free to air channels are in C-Band.
I can able to tune only Horizontal channels,but not Vertical channels in C-Band
Is there any way to tune Vertical channels in C-Band.
If so how can do it.
Sorry for rmy poor English
🌟 Recommended Tools & Services
• Formify.one - Free Online Form Creator (Better than Google Forms). - Create Professional Forms That Match Your Business, Form Builder That Actually Helps You Collect More Responses
• CrispShare - Screenshot Editor That Makes Your Work Look Professional (Without Design Skills). - Make Your Screenshots Stand Out in Crowded Social Feeds
• DVB Dream - Best TV Reception/Record software for your computer DVB add on. - Stop Missing Your Favorite Shows - Record TV Directly to Your PC. Turn Your Computer Into a Professional TV Recorder. Unlock Its Full Potential With Professional TV Software
Technisat Skystar2 v.2.6d
Top
Snuffer
love DVB Dream!
Posts:121
Joined:Fri Jun 16, 2006 9:44 pm

Postby Snuffer » Fri Nov 28, 2008 8:00 am

Yes change the INI file remove what you will not scan and make new line's if the freq etc is not there.
Top
selvam
Just popping in
Posts:6
Joined:Thu Dec 13, 2007 9:31 am

Postby selvam » Sat Nov 29, 2008 11:29 am

Dear Snuffer,
I have already having the vertical transponder frequencies in the INI file,
but my SS2 is not tuning vertical channels.
Then what to do?
Technisat Skystar2 v.2.6d
Top
Snuffer
love DVB Dream!
Posts:121
Joined:Fri Jun 16, 2006 9:44 pm

Postby Snuffer » Sun Nov 30, 2008 1:31 am

Do you turn the LNB for H or V with a motor ???
Top
selvam
Just popping in
Posts:6
Joined:Thu Dec 13, 2007 9:31 am

Postby selvam » Mon Dec 01, 2008 2:32 am

Dear Snuffer,
I am using single C-Band LNBF which is having voltage switching for recption of Horizontal and Vertical frequencies.
Technisat Skystar2 v.2.6d
Top
Snuffer
love DVB Dream!
Posts:121
Joined:Fri Jun 16, 2006 9:44 pm

Postby Snuffer » Mon Dec 01, 2008 3:43 am

MMMM strange perhaps make in ini file the H to V and scan there is 14 and 18 V perhaps thats give a problem???
Top
selvam
Just popping in
Posts:6
Joined:Thu Dec 13, 2007 9:31 am

Postby selvam » Mon Dec 01, 2008 7:52 am

Dear Sir,
Is there any provision in the software DVBDream for changing the H & V switching (18V & 14V) for C-Band.
Technisat Skystar2 v.2.6d
Top
patmos
Just can't stay away
Posts:46
Joined:Wed Nov 14, 2007 5:00 am

Postby patmos » Wed Dec 03, 2008 7:19 am

Selvam I use C band LNB to receive from many sats. I have no such problem. There is no need to select voltage in DD. It will select automatically.18V = Horizontal 13v = Vertical . With a multimeter you can check if you get 13V.check for any short on your cable. Lastly I had a nearly similar problem. I could receive only verticals on C band. I changed three LNBs with same problem. I discovered that It was one of my Diseqc ports that was causing this problem. Is your problem on c band only? Have you checked if your vertical probe is functioning.
TBS 5922 USB
iMAC late 2012 /windows8 64bit vmware
3M prime motorised from AM33 (96.5 E) to AM44 (11W),
1.5m on Eutelsat 36A/B
2.4m solid with two LNBs on PAS 7/10 C/ku
60 cm on Eutelsat16A
Top
selvam
Just popping in
Posts:6
Joined:Thu Dec 13, 2007 9:31 am

Postby selvam » Thu Dec 04, 2008 1:29 am

Dear patmos,
Thanks for your reply.
I am receiving the H & V channels of C-Band in my HUMAX VACI-5300.So i think that there is no problem in the C-Band LNB. I think the problem may be in Skystar-2(Hardware) voltage switching. Any suggestion regarding checking the problem in Hardware is expected. Sorry for my poor English.
Technisat Skystar2 v.2.6d
Top
selvam
Just popping in
Posts:6
Joined:Thu Dec 13, 2007 9:31 am

Postby selvam » Sat Dec 20, 2008 11:23 pm

Dear patmos,
Thanks for your reply.
I am receiving the H & V channels of C-Band in my HUMAX VACI-5300.So i think that there is no problem in the C-Band LNB. I think the problem may be in Skystar-2(Hardware) voltage switching. Any suggestion regarding checking the problem in Hardware is expected. Sorry for my poor English.
Dear Members.
Please help me to solve the problem.
Technisat Skystar2 v.2.6d
Top
Post Reply

Return to “Rusty Posts”

Who is online

Users browsing this forum: No registered users and 1 guest