no channel change with firedtv-c and alphacrypt cam

[nickmwd]

Not sure if it's a bug or just a stupidity at my end......

I am not able to change channels with firedtv-c with latest firedtv drivers(all channels are encrypted, and using official cam and smartcard - all's ok with mytheatre).

The channel scan by DD went smooth and all channels were found. I compared DD's channel properties with MyTheatre's channel properties and could not find any differences.

The only way to get video is the following (e.g. watching eurosport):
1. open DD and select eurosport
2. close DD
3. open MyTheatre and select eurosport
4. close MyTheatre
5 open DD
Since DD selects the last active channel it tunes to eurosport, and now I get video

Changing to another channels gives no video, the log file shows a growing TS. Changing back to eurosport results in video again.
This also happens when the channels are on the same transponder.

I checked "channel lock" and "viewable", that's not it.
Furthermore after tuning to a channel there is a yellow padlock in the lower grey area of the screen. Can't find the meaning (encryption??).

Am I missing something? Any clue?

[rel]

can you attach your log files?

bda.log and dvbdream.log

[nickmwd]

Sorry for the delay, here they are.

This is what I did:
- Tune to BBC1 using DD and close DD
- Tune to BBC1 using MT and close MT
- open DD, toned to BBC1 ok
- change channel to BBC2, result: black screen
- change back to BBC 1, result: all's ok
- close DD

[rel]

have you tried changing CI PMT option ?
Main menu->Tools->CI/CAM Console->Max PMT count
try 1 , then it 0 if it doesn't work. you need to restart DD after changing these options.
please let me know about the results.

[nickmwd]

Tried that, no difference. Still no channel change.
The buttons below the bar are greyed out, does this mean the CAM isn't recognized?