Stab HH 120 DiSEQC 1.2 motor problem

Please avoid duplicating bug reports in this section. (search in the previous posts first, if you find any related post, just reply the post to confirm the bug) https://www.dvbdream.org/howtoreportbug.php

Moderators: Dreamer, FredB, X05

maxxxxel
Not too shy to talk
Posts: 15
Joined: Sat Feb 02, 2008 1:08 pm

Stab HH 120 DiSEQC 1.2 motor problem

Postby maxxxxel » Wed Feb 06, 2008 2:24 am

As posted here

http://www.dvbdream.org/forum/viewtopic.php?t=1279

Tried my Stab HH 120 with the new BDA v2.0 and Scanman's 1.08 and i cannot move the dish.

Working fine with ProgDVB + Dixie plugin, but ProgDVB is too unstable :(

Happauge WinTV-Nova-HD-S2 - DD1.4h - bda_20080301_6
- Drivers NOVA-HVR-CD40a2 - Driver version 2 2.119.25023.0 - remote + wtvirbridge ;-)

HTPC - WinXP SP2 - AMD 3800 X2 939 - 1GB DDR2
$20 Donated to DVBDream. Support DVBdream and donate some $ :-D
User avatar
ScanMan
love DVB Dream!
Posts: 191
Joined: Fri Sep 08, 2006 4:52 am
Location: 49565 Germany

Postby ScanMan » Mon Mar 03, 2008 5:54 am

I also use a STAB HH120.
Up to 1.3c it works fine so far, but since 1.4 there is a curious behavior that motor doesnt move every time - sometimes yes, sometimes not.
I'm checking and trying the whole weekend to get any conclusion: No real result yet.

If you are using my Interface, the following things are neccessary to be set well:
- Diseqc should set to NONE, add all needed positions under the first entry
- Stored positions in rotor must set correct in the Positioner-Menü
- Under Options/Preferences/Performance the entires 'Alwys retune' and 'Always force to resend disedc commands' must be checked.

Please try and let me know your results.
.
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
User avatar
ScanMan
love DVB Dream!
Posts: 191
Joined: Fri Sep 08, 2006 4:52 am
Location: 49565 Germany

BUG ? Remaining probs

Postby ScanMan » Tue Mar 04, 2008 4:23 am

Example for my mostly used satellites on 23.5°, 19.2° and 13.0°:
Rotor STAB HH 120
TwinHan 1041 (AD-SP 400)
DD V1.4i p1 with BDA_ALL 1.0.8 (and test with 1.1.0)
DiSEqC-communication directly with TwinHan IOCTRL in BDA_ALL.

DD-settings marked:
- 'Always retune'
- 'Always force sending diseqc commands'
- Repat diseqc: min. 1 (doesnt matter if greater)
If those are not checked, nothing will work.
Set 'Delay after diseqc switching' has no 'feelable' effect.


Normally on start, the dish is positioned to 19.2°.

Soon after selecting an other channel on a different satellite, a progressbar appears for aprox. 4 seconds. (i deselect the confirmation)

As long as the progressbar is increasing, the video still remains running - so i assume no command is send during this (little) time to the interface / tuner.

Picture first freezes when the progressbar disappears - assuming furthermore 'now' a diseqc-command is send and motor is moving so there is no more data to decode in DD.

The curious things:

A)
When i fist steer from 19.2° to 23.5° it WON'T ( ! ) work as aspected.
Closing DD and restart (with tuned to last channel on the last satellite !) will bring no picture.
Using an other DD-intallation tuned to 19.2° show a picture >>> seems that the motor hasn't moved.

Keeping DD still running and sending a manual 'GOTO' for 23.5° shows upcoming signal & quality in the Positioner-window -

BUT NOT IN DD's Main-Window !
Re-select the tuned channel (or an other one on this position) shows picture immedeatly ! So motor has moved...

B - 1)
Staying on 23.5° and keep DD running.
When selecting a programm on 19.2° again, normally in nearly 100% of all tries the motor moves and picture will come up without additional commands or reselecting the / a channel !!!

B - 2)
Steering directly from 23.5° to 13.0'. The progressbar seems to need a little more time.
Picture won't come up - but a simple relesect on the prgramm shows picture immedeatly.
>>> Seems the motor has moved, but DD didn't retune in time !

C)
Steering back from 13.0° to 19.2° or 23.5° has same effect as described under A)


It seems that steering from east to west will work (motor is moving) but from west to east always needs a little'HELP' by sending an extra command.

I don't beleave to problem in my interface, TwinHan's IOCTRL and / or the motor.
Commands and routines are always the same.
An earlier builded plugin for ProgDVB and a simple DVB-application by myself is working without any probs !


For further discussion and / or getting any conclusion to this i added a zip wth 2 pairs of LOF-files.
1_xxx.LOG is when starting DD on 19.2° and steering to 23.5°
2_xxx.LOG vice versa.

The only 'abnormal' thing i noticed is that DD tunes more than needed.... (BDA_ALL.LOG)
Attachments
LOGs.zip
(7.64 KiB) Downloaded 385 times
.
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
User avatar
ScanMan
love DVB Dream!
Posts: 191
Joined: Fri Sep 08, 2006 4:52 am
Location: 49565 Germany

... tried to find the cause

Postby ScanMan » Tue Mar 04, 2008 9:21 am

Because i'm wondering about several non-manual-started tune-request's and why the same TP sometimes will lock and sometimes not, i made some changes in my BDA-interface to avoid this.
Behavior seems to be the same at last...

As follows i give you a summary of several shortened BDA_ALL.LOG's with detailed description what i have done.
My conclusion:
'There must be something wrong in the state of Denmark' (an old middle-age saying here in Europe/Germany...)
But what ?

Maybe DD didn't recognize/remind internally that a satellite has changed ?
Or this or that ? I dont't know the internal cycles of DD....

1st try:
_________________________________________

Starting DD with 'SR Fernsehen' on 23.5°
[15:46:02:578] [DD-Request]::CancelTuning
[15:46:02:578] [DD-Request]::SetTuner - TimeOut: 6000ms
[15:46:02:578] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 11635000 SymbolRate: 28500 Polarization: 0
[15:46:02:578] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00000000
[15:46:04:437] [DD-Request]::SetTuner - Successful locked after 218ms
Picture / sound is ok
Selecting '3SAT' on 19.2°
[15:46:40:656] [DD-Request]::SendDiSEqC
[15:46:40:656] [DD-Request]::SendDiSEqC - CMD: E0 31 6B 01 - ToneBurst: 0
[15:46:40:875] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[15:46:40:875] [TH IOCTL]::Sending DiSEqC-CMD successfull
These are the ~ 4 seconds displaying the progressbar ?!
[15:46:45:109] [DD-Request]::CancelTuning
[15:46:45:109] [DD-Request]::SetTuner - TimeOut: 6000ms
[15:46:45:125] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 11954000 SymbolRate: 27500 Polarization: 0
[15:46:45:125] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00000000
Sending same DiSEqC-command again after TuneRequest from BDA returns
[15:46:47:968] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[15:46:47:968] [TH IOCTL]::Sending DiSEqC-CMD successfull
Loop is checking for tuner to lock....
[15:46:48:093] [DD-Request]::SetTuner - Successful locked after 125ms
... everything's OK - tuned after 1/8 second !!!

2nd try:
_________________________________________

Starting DD with '3SAT' on 19.2° (last tune 1st try)
[15:57:19:875] [DD-Request]::CancelTuning
[15:57:19:875] [DD-Request]::SetTuner - TimeOut: 6000ms
[15:57:19:875] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 11954000 SymbolRate: 27500 Polarization: 0
[15:57:19:875] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00000000
[15:57:21:531] [DD-Request]::SetTuner - Successful locked after 125ms
Picture / sound is ok
Selecting '2M Maroc' on 13.0°
[15:57:51:484] [DD-Request]::SendDiSEqC
[15:57:51:484] [DD-Request]::SendDiSEqC - CMD: E0 31 6B 04 - ToneBurst: 0
[15:57:51:703] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[15:57:51:703] [TH IOCTL]::Sending DiSEqC-CMD successfull
These are the ~ 4 seconds displaying the progressbar ?!
[15:57:57:578] [DD-Request]::CancelTuning
[15:57:57:578] [DD-Request]::SetTuner - TimeOut: 6000ms
[15:57:57:593] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 12476000 SymbolRate: 27500 Polarization: 0
[15:57:57:593] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00010001
Sending same DiSEqC-command again after TuneRequest from BDA returns
[15:58:00:203] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[15:58:00:203] [TH IOCTL]::Sending DiSEqC-CMD successfull
[15:58:00:343] [DD-Request]::SetTuner - Successful locked after 141ms
As to see: Tuner is locked !!!
>>> No picture or sound in DD, but level/quality is displyed as normal !!!
Selecting '3 Channel' on 13.0°
[15:58:31:843] [DD-Request]::CancelTuning
[15:58:31:843] [DD-Request]::SetTuner - TimeOut: 6000ms
[15:58:31:859] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 10971000 SymbolRate: 27500 Polarization: 0
[15:58:31:859] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00010001
(no extra DiSEqc-command sending here - same position)
[15:58:40:156] [DD-Request]::SetTuner - not locked until TimeOut
WHY THIS ?????
Sending a manual 'GOTO' for 13.0° from positioner-window
[15:58:59:906] [DD-Request]::SendDiSEqC
[15:58:59:906] [DD-Request]::SendDiSEqC - CMD: E0 31 6B 04 - ToneBurst: 0
[15:59:00:125] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[15:59:00:125] [TH IOCTL]::Sending DiSEqC-CMD successfull
Who the f--k is asking for retune ??? Not me...
[15:59:00:375] [DD-Request]::CancelTuning
[15:59:00:468] [DD-Request]::SetTuner - TimeOut: 6000ms
[15:59:00:468] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 10971000 SymbolRate: 27500 Polarization: 0
[15:59:00:468] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00010001
.... and tune again !
TuneRequest hasn't finished yet - flag is set for no double-call.
[15:59:02:828] [DD-Request]::CancelTuning
[15:59:02:921] [DD-Request]::SetTuner - TimeOut: 6000ms --->>> returns immediatly because of flag is set !!!
This is a message from the 1st call
[15:59:03:031] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[15:59:03:031] [TH IOCTL]::Sending DiSEqC-CMD successfull
.... and tune again !
[15:59:04:359] [DD-Request]::CancelTuning
[15:59:04:468] [DD-Request]::SetTuner - TimeOut: 6000ms --->>> returns immediatly because of flag is set !!!
.... and tune again !
[15:59:06:359] [DD-Request]::CancelTuning
[15:59:06:453] [DD-Request]::SetTuner - TimeOut: 6000ms --->>> returns immediatly because of flag is set !!!
.... and tune again !
[15:59:08:359] [DD-Request]::CancelTuning
[15:59:08:468] [DD-Request]::SetTuner - TimeOut: 6000ms --->>> returns immediatly because of flag is set !!!
This is a message from the 1st call
[15:59:09:046] [DD-Request]::SetTuner - not locked until TimeOut
1st TuneRequest has finished here !
.... and tune again !
[15:59:10:359] [DD-Request]::CancelTuning
[15:59:10:468] [DD-Request]::SetTuner - TimeOut: 6000ms
[15:59:10:468] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 10971000 SymbolRate: 27500 Polarization: 0
[15:59:10:468] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00010001
[15:59:12:468] [DD-Request]::SetTuner - Successful locked after 110ms
Finished, picture & sound is ok
>>> No picture or sound in DD, AND NO level/quality is displyed as before !!!
Selecting '2M Maroc' on 13.0° manual again
[15:59:17:000] [DD-Request]::CancelTuning
[15:59:17:000] [DD-Request]::SetTuner - TimeOut: 6000ms
[15:59:17:000] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 12476000 SymbolRate: 27500 Polarization: 0
[15:59:17:000] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00010001
[15:59:19:140] [DD-Request]::SetTuner - Successful locked after 125ms
Finished, picture & sound is ok

3rd try:
_________________________________________

Starting DD with '2M Maroc' on 13.0° (last tune 2nd try)
[16:43:49:640] [DD-Request]::CancelTuning
[16:43:49:640] [DD-Request]::SetTuner - TimeOut: 6000ms
[16:43:49:640] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 12476000 SymbolRate: 27500 Polarization: 0
[16:43:49:640] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00000000
[16:43:51:296] [DD-Request]::SetTuner - Successful locked after 125ms
[16:44:07:781] [DD-Request]::SendDiSEqC
[16:44:07:781] [DD-Request]::SendDiSEqC - CMD: E0 31 6B 01 - ToneBurst: 0
[16:44:08:000] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[16:44:08:000] [TH IOCTL]::Sending DiSEqC-CMD successfull
As to see again: Tuner is locked !!!
>>> No picture or sound in DD, but level/quality is displyed as normal !!! Same as above.
Selecting '3SAT' on 19.2°
[16:44:13:875] [DD-Request]::CancelTuning
[16:44:13:875] [DD-Request]::SetTuner - TimeOut: 6000ms
[16:44:13:875] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 11954000 SymbolRate: 27500 Polarization: 0
[16:44:13:875] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00000000
[16:44:16:640] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[16:44:16:640] [TH IOCTL]::Sending DiSEqC-CMD successfull
[16:44:16:765] [DD-Request]::SetTuner - Successful locked after 125ms
As to see again: Tuner is locked !!!
>>> No picture or sound in DD, but level/quality is displyed as normal !!! Same as above.

Closing and starting DD again....
... same procedure !
Neither changing to any program on 19.2°, resetting DirectShow or the Device has an effect:
Allway signal & Quality - no picture / sound.
The only thing you see in OSD is the selcted channel/sat - no program-information is displayed.

4th try:
_________________________________________

Starting DD with '3SAT' on 19.2° (last tune 3rdt try)
[16:55:06:609] [DD-Request]::CancelTuning
[16:55:06:609] [DD-Request]::SetTuner - TimeOut: 6000ms
[16:55:06:609] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 11954000 SymbolRate: 27500 Polarization: 0
[16:55:06:609] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00000000
[16:55:09:062] [DD-Request]::SetTuner - Successful locked after 140ms
.... same as in 3rd try - no pic/ sound.
Selecting 'SR Fernsehen' on 23.5° again
[16:56:08:312] [DD-Request]::SendDiSEqC
[16:56:08:312] [DD-Request]::SendDiSEqC - CMD: E0 31 6B 02 - ToneBurst: 0
[16:56:08:531] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[16:56:08:531] [TH IOCTL]::Sending DiSEqC-CMD successfull
[16:56:12:765] [DD-Request]::CancelTuning
[16:56:12:765] [DD-Request]::SetTuner - TimeOut: 6000ms
[16:56:12:765] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 11635000 SymbolRate: 28500 Polarization: 0
[16:56:12:765] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00010000
[16:56:15:781] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[16:56:15:781] [TH IOCTL]::Sending DiSEqC-CMD successfull
[16:56:21:859] [DD-Request]::SetTuner - not locked until TimeOut
[16:56:33:843] [DD-Request]::CancelTuning
[16:56:33:937] [DD-Request]::SetTuner - TimeOut: 6000ms
[16:56:33:937] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 11635000 SymbolRate: 28500 Polarization: 0
[16:56:33:937] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00010000
No pic / sound, no signal / quality.
Now follwing same 'events' as in 2nd try....
Give a manual 'GOTO' for 23.5 again as above
[16:56:35:171] [DD-Request]::SendDiSEqC
[16:56:35:171] [DD-Request]::SendDiSEqC - CMD: E0 31 6B 02 - ToneBurst: 0
[16:56:35:390] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[16:56:35:390] [TH IOCTL]::Sending DiSEqC-CMD successfull
[16:56:36:437] [TTH_IOCTL(@0304EDD4)->TH IOCTL]::THBDA_IOCTL_SET_DiSEqC ok
[16:56:36:437] [TH IOCTL]::Sending DiSEqC-CMD successfull
[16:56:37:843] [DD-Request]::CancelTuning
[16:56:37:937] [DD-Request]::SetTuner - TimeOut: 6000ms
[16:56:39:828] [DD-Request]::CancelTuning
[16:56:39:937] [DD-Request]::SetTuner - TimeOut: 6000ms
[16:56:42:000] [DD-Request]::SetTuner - Successful locked after 5563ms
[16:56:47:875] [DD-Request]::CancelTuning
[16:56:47:968] [DD-Request]::SetTuner - TimeOut: 6000ms
[16:56:47:968] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 11635000 SymbolRate: 28500 Polarization: 0
[16:56:47:968] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00010000
[16:56:50:328] [DD-Request]::SetTuner - Successful locked after 94ms
Selecting 'SAT 1 National' on 23-5°:
[16:57:06:265] [DD-Request]::CancelTuning
[16:57:06:265] [DD-Request]::SetTuner - TimeOut: 6000ms
[16:57:06:265] [TBDADevice(@0304ED60)->TuneRequest]::DVB-S - Frequency: 11515000 SymbolRate: 27500 Polarization: 0
[16:57:06:265] [TBDADevice(@0304ED60)->TuneRequest]::Setting up DiSEqC to 0x00010000
[16:57:08:562] [DD-Request]::SetTuner - Successful locked after 140ms
.... everything' absolutly OK !

You may guess what happens next !?
YES - same try as in 1st try....
... works without any prob.
Last edited by ScanMan on Wed Mar 05, 2008 9:40 am, edited 2 times in total.
.
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
User avatar
ScanMan
love DVB Dream!
Posts: 191
Joined: Fri Sep 08, 2006 4:52 am
Location: 49565 Germany

Intermediate conclusion

Postby ScanMan » Tue Mar 04, 2008 11:01 am

Intermediate conclusion:

let's compare computer/software with a human 'device'.
A computer with more than one CPU/Kernel can handle min. 2 threads ore more (e. g. commands at same time) in real at the same time. Nice to have... If.
Because of much more efficiency a human brain can handle many more procedure's than a computer - allthough there is only one brain...

A human being can 'handle' mechanical things only one after the other ! We only have one pair of hands and feet.
Several people are able to do this simultaneous (like well progammed applications) - the rest of the world normally discharge their work in a manageable chain. Same as normal software...

Why talking abaout this ?
You can devide an application in as many threads (parallel carry out) as you wish to avoid blocking them from each other and have more stabilitly if any procdure crashes or hang.
Logically the speed will depend on the 'brain', memory, disk-acceptance of the machine and many more.

When working with DVB-Hardware mostly only one receiver/tuner is installed and this is similiar to 'normal people':
You can talk to only one person / can do only one work at the moment on the dependent 'interface' (mouth, legs, arms, ...).

For understanding:
'Please tune to this frequency, please give SignalInfo, please switch with this DiSEqC-command, please do this and please do that ... and Hands up: Give me all your money - immedeatly !'
I think this poor DVB-Tuner (with it's hopefully well programmed driver - oooooh my good...) is a little bit overstrained sometimes when it's been 'shoot' by several threads nearly at the same time ?!

My recommendation:
Actually the slowest computer will react faster to your demand as you can click with your mouse or on keboard !
So let's think about smooth talking to the DVB-Hardware and process the results step by step
- Tune up, baby !
- Come on, lets move !
- Show me all your values !
- Gimme all your Data... as fast as you can.
- ... and several others DVB-commands can look like in human language :-)

Always spend neccessary time for response - your wife / husband won't return with any aspected answer in micro-/milliseconds....

Did she / he ??!!
Yes ? - Don't tell it to other people in your neighborhood !!!
.
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date

Return to “Bug Reports”

Who is online

Users browsing this forum: No registered users and 1 guest