Page 1 of 1
FEC value problem
Posted: Wed Dec 02, 2015 12:01 pm
by satellitevisitor
FEC 3/4 and also FEC 2/5 give both signals and image to a manual search of the same channel in 8PSK modulation. (which is then the correct FEC ? )
Use Windows 7 with DVB Dream 2.7.4 and WinTV-NOVA-HD-S2 PCI card
Is there a solution to this problem ?
Thanks in advance .
Re: FEC value problem
Posted: Thu Dec 10, 2015 11:48 am
by rel
Some cards (tuner hardware or driver) have auto-fec feature, they try to find correct FEC if they cannot lock. We cannot do much here.
Re: FEC value problem
Posted: Mon Dec 14, 2015 9:43 am
by satellitevisitor
Thanks for the info , but when I do all the different modulation and FEC values fill : I have always signal ... (Picture is OK)
Previously this was not so, only when the FEC and modulation was entered correctly gave the signal strength on display .
(Have already tested with 3 receivers and 2 models PCI cards + various codecs)
Is there perhaps someone with this problem ?
Re: FEC value problem
Posted: Sat Aug 13, 2016 11:32 pm
by rel
I guess it has been so after a driver update. New drivers of DVB cards try to make things easier for user.