Page 1 of 1

Invalid pointer when scanning

Posted: Tue Oct 18, 2016 7:35 am
by meolskopite1984
Hi

When doing an auto-scan on a satellite I often get Invalid Pointer errors which cause me to have to End Task on DVBDream and open it again and re-try the scan.

Most of the time the scan on the same satellite with the same ini file (generated by EBSPro or Crazyscan) will scan fine.

This has only started to happen since updating to 3.1.1. Below is an ini file for 0070 which I had an invalid pointer error and then a successful scan on the second go.

My card is a TBS-6902 and I am using it in BDA mode.

Can anyone help?

Thanks

[SATTYPE]
1=0070
2=7e
[DVB]
0=29
1=10721,V,27500,34,QPSK
2=10763,V,30000,34,QPSK
3=10804,V,29900,34,QPSK
4=10804,H,30000,56,NBC_QPSK
5=10845,H,30000,56,NBC_QPSK
6=10845,V,30000,34,QPSK
7=10887,V,30000,56,NBC_QPSK
8=10887,H,30000,56,NBC_QPSKa
9=10928,V,30000,56,NBC_QPSK
10=10928,H,30000,34,QPSK
11=11062,V,7201,34,8PSK
12=11102,V,14400,34,8PSK
13=11188,V,3256,34,QPSK
14=11192,V,3256,34,QPSK
15=11221,H,27500,34,QPSK
16=11455,V,22500,56,NBC_QPSK
17=11471,H,30000,34,QPSK
18=11492,V,30000,34,QPSK
19=11513,H,29900,34,QPSK
20=11533,V,30000,34,QPSK
21=11554,H,30000,34,QPSK
22=11575,V,30000,34,QPSK
23=11596,H,30000,34,QPSK
24=11616,V,30000,34,QPSK
25=11638,H,30000,56,NBC_QPSK
26=11667,V,30000,56,NBC_QPSK
27=11680,H,30000,34,QPSK
28=12532,V,1666,34,NBC_QPSK
29=12555,V,4035,56,8PSK

Re: Invalid pointer when scanning

Posted: Thu Oct 20, 2016 7:01 am
by meolskopite1984
Screenshot of error message attached.

Re: Invalid pointer when scanning

Posted: Fri Oct 21, 2016 6:58 am
by meolskopite1984
Replacing psiparser.dll from an older version of DVB-Dream seems to have fixed the problem.

Stephen

Re: Invalid pointer when scanning

Posted: Mon Oct 24, 2016 11:25 pm
by rel
Replacing psiparser.dll from an older version of DVB-Dream seems to have fixed the problem.

Stephen
From which version you took the psiparser.dll ?

Re: Invalid pointer when scanning

Posted: Thu Oct 27, 2016 5:44 am
by meolskopite1984
Hi Rel,

I took it from DVBDream 3.0. File size was different so I assume the file is also different.

Stephen

Re: Invalid pointer when scanning

Posted: Tue Nov 22, 2016 12:37 pm
by konradpaluszek
Is this file is responsible for changing channels?

Re: Invalid pointer when scanning

Posted: Sun Dec 11, 2016 11:22 am
by rel
found the problem, it is about internal log files, I've fixed it in upcoming version

Re: Invalid pointer when scanning

Posted: Wed Dec 21, 2016 8:11 am
by dog-man
Has a date been set for this update?

Re: Invalid pointer when scanning

Posted: Thu Dec 29, 2016 9:21 am
by rel
Has a date been set for this update?
v3.2 released today