Channel list export
Posted: Sun Aug 25, 2019 6:48 pm
Hi
I record a lot of TV programs and use my own scheduler that can start
any of my four DVB Dream recorders (two PC;s) using the command line interface.
Most of the time it's perfect, but every now and then, it records the wrong channel
This evening I updated to the latest software and re-tuned both machines.
I then did a test, and got the wrong channel again. So I investigated and discovered that
the channel I wanted to record had channel 0. I set it to the required channel
and problem solved.
However, I don't want to check all the channels I record every time I re-tune.
So is there some way I can save the channel list (just the name and channel
number),so that I can use a simple program to automate this process?
Many thanks,
Richard Gamester
I record a lot of TV programs and use my own scheduler that can start
any of my four DVB Dream recorders (two PC;s) using the command line interface.
Most of the time it's perfect, but every now and then, it records the wrong channel
This evening I updated to the latest software and re-tuned both machines.
I then did a test, and got the wrong channel again. So I investigated and discovered that
the channel I wanted to record had channel 0. I set it to the required channel
and problem solved.
However, I don't want to check all the channels I record every time I re-tune.
So is there some way I can save the channel list (just the name and channel
number),so that I can use a simple program to automate this process?
Many thanks,
Richard Gamester