Page 1 of 1
Progressive/interlaced representation of the broadcast info
Posted: Thu May 07, 2015 2:14 pm
by serkanguzel
Progressive/interlaced representation of the broadcast information.
Hi my master,
I know almost all of the channels broadcasting satellite, "
interlaced" is.
However, though few in number, "
progressive" there are broadcasting channels.
Example ; Hotbird 10971 H 29700 DVB-S2, SRG SWISS package. This package ; video resolution ; 1280 x 720
p
In addition; 4K channels are progressive.
Such as... There are other satellites, the channels / packages.
The publication's, "interlaced/progressive" feature, shown in ProgDVB window ? Or menu can be displayed in any place?
Regards.
Re: Progressive/interlaced representation of the broadcast i
Posted: Tue May 12, 2015 7:21 am
by rel
displayed in status bar on v2.7 upcoming version
might be placed on OSD as well
Re: Progressive/interlaced representation of the broadcast i
Posted: Sat Jun 06, 2015 1:26 am
by Andre
Anybody knows where i can get this nice OSD or a similar one???
Thank you!
Re: Progressive/interlaced representation of the broadcast i
Posted: Sat Jun 06, 2015 5:03 am
by serkanguzel
Anybody knows where i can get this nice OSD or a similar one???
Thank you!
This picture; "progressive / interlaced" is used to exemplify representation.
So this picture; "Dreambox newnigma2" image belongs.
So your question; "DVB Dream" is not relevant.
Re: Progressive/interlaced representation of the broadcast i
Posted: Sat Jun 06, 2015 6:51 am
by Andre
i thought it was osd for dvbdream.
Re: Progressive/interlaced representation of the broadcast i
Posted: Sun Jun 07, 2015 4:35 am
by serkanguzel
Hi my master ( @
rel )
Thank you for new version.
But,
DVB Dream v.27 version ;
Progressive / interlaced; It does not appear !...
Example ;
Swiss channel ;
SRF 1 HD is Progressive channel.
Regards.
Re: Progressive/interlaced representation of the broadcast i
Posted: Sun Jun 07, 2015 10:14 am
by rel
I think, you just need to increase DVB Dream width (window size) to see the text , right after aspect ratio "16:9" .
Re: Progressive/interlaced representation of the broadcast i
Posted: Sun Jun 07, 2015 11:14 am
by serkanguzel
I think, you just need to increase DVB Dream width (window size) to see the text , right after aspect ratio "16:9" .
The greatest width ;
Can this make ?
Re: Progressive/interlaced representation of the broadcast i
Posted: Mon Jun 08, 2015 1:29 am
by rel
Yea, need to think of something, next patched version might adjust status bar better.
Re: Progressive/interlaced representation of the broadcast i
Posted: Mon Jun 08, 2015 1:49 am
by serkanguzel
Yea, need to think of something, next patched version might adjust status bar better.
Thank you very much.
Re: Progressive/interlaced representation of the broadcast i
Posted: Fri Jun 12, 2015 2:39 pm
by serkanguzel
Hi my master,
Thank you for effort, for v2.7.1 version.
Little bug ;
This channel "DVB-S transponder" is transferred from.
* Interlaced DVB-S SD, no problem.
* Interlaced DVB-S2 HD, no problem.
* Progressive DVB-S2 HD, no problem.
Note; Publication parameters; While the window is small, it is able to adjust you can see them all ?
Re: Progressive/interlaced representation of the broadcast i
Posted: Fri Jun 12, 2015 11:35 pm
by rel
Some h264 channels are MBAFF (neither progressive , nor interlaced) they wont show "i" or "p".
But I will check on that channel, maybe DD somehow couldnt capture interlacing info from the stream.
Note; Publication parameters; While the window is small, it is able to adjust you can see them all
cant adjust much, when window size is smaller that causes problem
Re: Progressive/interlaced representation of the broadcast i
Posted: Sat Jun 13, 2015 2:37 am
by serkanguzel
Some h264 channels are MBAFF (neither progressive , nor interlaced) they wont show "i" or "p".
But I will check on that channel, maybe DD somehow couldnt capture interlacing info from the stream.
Note; Publication parameters; While the window is small, it is able to adjust you can see them all
cant adjust much, when window size is smaller that causes problem
Thank you for reply...
I wanted to see was something like this.
Of course, if possible;
Regards.
Re: Progressive/interlaced representation of the broadcast i
Posted: Sat Jun 13, 2015 4:50 am
by rel
yes, something like that is possible
Re: Progressive/interlaced representation of the broadcast i
Posted: Tue Sep 01, 2015 4:49 am
by serkanguzel
yes, something like that is possible
Hi my master,
My last message feature, active ?