1.1h - Channels scanned as data (B2C2)

[Dreamer]

I tried this TP, first time, all channels were scanned as data, I tried again - immediately and then it was OK, strange, with B2C2 device v 1.0.3.

CHANNEL
Name: "EVENEMENT HD" Provider: "CSAT"
TRANSPONDER
12581000, V, 22000000 QPSK
Satellite: 0192 - Astra 1A-H, 2C
Signal Level:72% Quality:93%
IDs
NetwordID:1 TransponderID:1110 SID:9306
PIDs
Video:165 Audio:100 - fra PCR=165 PMT:1285 Teletext:0
DATE/TIME
20. 7. 2006 23:48:43 (GMT +1)

Edit: Another problem - I tried "Update all" (because of wrong name) and first time both audio pids get lost, then I tried it again, twice and channel was scanned as data again.

AMD Athlon 64 3000+, 1GB RAM, ATI RX800 256MB, SB Audigy 2 Value, SkyStar 2 rev.2.3, TechniSat DVB 4.4.0, Windows XP SP2

[rel]

hi,

I cant get signal from that TP (19.2 needs bigger dish here for some beams/transponders)

can you record and send me some sample stream?

Code: Select all

How to capture a sample stream
1) enable "Full TS" mode in device options, restart DD
2) start "Stream Recorder" module on the problematic transponder, record about 100 mb
3) upload file to somewhere (FTP). If you dont have any FTP space, ask for FTP server via rreloc@yahoo.com

[Dreamer]

OK, I'll try, now another channel - problem:

CHANNEL
Name: "SAMACOM TEST" Provider: "SamaCom"
TRANSPONDER
11746000, H, 27500000 QPSK
Satellite: 0130 - Hotbird 1-5

When I tried "Update all", I get different names, sometimes "SAMACOM TEST" and sometimes "Nameless 0_SID9514" (this time TID and NID have 0 value), but maybe it's other bug, or even no bug.

[Dreamer]

Strange, I don't have any problems with that TP (from first post) now, could anyone else try to rescan that TP few times please?

Rel, please let me know if you still need that sample stream, I'm not sure if it would be good for something, since all channels are scanned correctly now.

[rel]

try to increase timeouts for PMT and SDT , use 3x or 4x of the current values

I cant reproduce it on 13e

[Dreamer]

try to increase timeouts for PMT and SDT , use 3x or 4x of the current values

I cant reproduce it on 13e

It works good now also with current values, so it should be OK...

I'll close it, I'll let you know if it happens again.

[Snuffer]

With feeds sometime's it happens with new B2c2_direct to here.

[Dreamer]

With feeds sometime's it happens with new B2c2_direct to here.

Yes, B2c2_direct doesn't work perfect, but this is about B2C2, therefore closed.