Diseqc patch for Hauppauge and Geniatech BDA drivers

Test version are publicly available test versions of the updates (patches like a, b, c, d...) and uploaded here for users to test/confirm the bug fixes before the release versions.

Moderators:X05, Dreamer, FredB

Post Reply
Zulummar
Posts:1
Joined:Sun Jan 20, 2008 5:48 pm
Re: Diseqc patch for Hauppauge and Geniatech BDA drivers

Postby Zulummar » Tue Mar 18, 2008 6:40 pm

http://www.dvbdream.org/files/bda_20080301_6.rar


please test and report the results.

Tested on:
- Hauppauge Nova-S-Plus (DVB-S) by Odz
- Geniatech DigiStar 3 (DVB-S) by SiDz
Not working for me on Geniatech digistar. I replaced the bda.dev with the one in this archive, and setup my sats, 119W on Port 1, 110W on Port 2, and when I scan, I get the same channels no matter which sat I select. I have added in Raw Diseqc commands, same thing. Went into prefs and selected always force to resend, and set resend to 2, turned on delays after sending diseqc and after tuning and everything, nothing seems to work. voltage for bandstacking lnb's is currently set to 18v. Any ideas? Here's my config...

Geniatech Digistar DVB-S
connected directly to Dish500 DishPro bandstacking twin LNB (with internal diseqc switch to swap between the 2 eyes, and 4 outputs)(currently pointed at 119W and 110W for testing purposes while I'm trying to get this dumb card setup)

no secondary switches or anything else
Geniatech Digistar DVB-S
ATI Radeon X1600XT
WinXP SP2
DishPro Quad LNB direct to DVB card
Top
walterlee
Just popping in
Posts:6
Joined:Mon Jan 01, 2007 4:42 pm

Geniatech doesn't work

Postby walterlee » Wed Apr 09, 2008 6:35 pm

I tried the BDA patch with my Geniatech, no luck. Can you fix it, to make Geniatech work?

It is appreciated for your help. I like DVBDream. It works in my Hauppauge NOVA-S with the new patch now, but doesn't work in GeniaTech.
Top
ak123ak
Posts:1
Joined:Fri Apr 11, 2008 12:34 am

Postby ak123ak » Fri Apr 11, 2008 12:51 am

my dream dvb 1.4
when i operate it withen 15 sec. freez
what is the solution?
ak
dream dvb
s2b
Top
Sonic
Posts:1
Joined:Fri Apr 11, 2008 4:31 am

Postby Sonic » Tue Apr 15, 2008 3:18 pm

:D Yes, this patch works on my Hauppauge Nova-HD-S2.
Thanks!
All that's needed now for a perfect DvbDream experience is smooth HD performance, like AltDvb...
Hi,

I have the same DVB-S card as yours. I have twin LNB and did manage to get both Astra and Hotbird after using this patch. But I couldn't get Astra afterwards for some reason. Could you tell me how did you made it work.

Thanks in advance
Hauppauge WinTV NOVA-HD-S2
Windows Vista Home premium
Twin LNB Hotbird & Astra 19°E
Top
imodraktheas
Posts:2
Joined:Wed May 07, 2008 7:00 pm

Diseqc patch for Hauppauge and Geniatech BDA drivers

Postby imodraktheas » Wed May 07, 2008 9:48 pm

I would be more than happy to look at the code and make it compliant for Conexant based cards such as the Geniatech devices. I am a software engineer and have done some DVB work before. If you would like to do it yourself, here is the Conexant SDK plus a link to some example code in Media Portal that works.

http://mediaportal.svn.sourceforge.net/ ... iew=markup

Let me know,
imo
Attachments
conexantexample.rar
Conexant BDA Example includes Diseqc
(417.08KiB)Downloaded 2771 times
Geniatech Satbox, Genpix-Skywalker Dishpro 110 & 119
Top
User avatar
rel
relocation
Posts:2051
Joined:Fri Jun 16, 2006 9:50 am

Postby rel » Tue May 13, 2008 4:18 pm

I need BDA Tuner Filter Name for Geniatech model where diseqc doesn't work.

Can anyone send me the bda.log file from dvbdream\devices folder ? attach here please
DVB Dream - because I have to dream about having time to code it
Top
iammike
Posts:2
Joined:Fri May 23, 2008 4:32 am

Usage with TechoTrend S2-3200 and positioner

Postby iammike » Fri May 23, 2008 4:40 am

I've been trying everything I can think of to get an S2-3200 card working with my positioner under DVBDream. I tried this last night, and it got my switch working, but it's still not able to talk to my VBox which I use to move my CBand dish. I also tried ScanMan's drivers, and had the same results: the switch worked but the positioner didn't. Is there anything I can do to make a positioner work with dream, or any information I can provide to assist in development of device support for the S2-3200?
Technotrend S2-3200, Genpix, Skystar 2, Vbox, CBand and several KU dishes
Top
User avatar
rel
relocation
Posts:2051
Joined:Fri Jun 16, 2006 9:50 am

Re: Usage with TechoTrend S2-3200 and positioner

Postby rel » Fri May 23, 2008 10:27 am

I've been trying everything I can think of to get an S2-3200 card working with my positioner under DVBDream. I tried this last night, and it got my switch working, but it's still not able to talk to my VBox which I use to move my CBand dish. I also tried ScanMan's drivers, and had the same results: the switch worked but the positioner didn't. Is there anything I can do to make a positioner work with dream, or any information I can provide to assist in development of device support for the S2-3200?
do you use diseqc switch and motor together in the system?
(better start a new topic when the subject is different, pls)
DVB Dream - because I have to dream about having time to code it
Top
User avatar
rel
relocation
Posts:2051
Joined:Fri Jun 16, 2006 9:50 am

Re: Usage with TechoTrend S2-3200 and positioner

Postby rel » Fri May 23, 2008 10:28 am

I've been trying everything I can think of to get an S2-3200 card working with my positioner under DVBDream. I tried this last night, and it got my switch working, but it's still not able to talk to my VBox which I use to move my CBand dish. I also tried ScanMan's drivers, and had the same results: the switch worked but the positioner didn't. Is there anything I can do to make a positioner work with dream, or any information I can provide to assist in development of device support for the S2-3200?
do you use diseqc switch and motor together in the system?
(better start a new topic when the subject is different, pls)
DVB Dream - because I have to dream about having time to code it
Top
iammike
Posts:2
Joined:Fri May 23, 2008 4:32 am

Postby iammike » Fri May 23, 2008 10:34 am

Yes, I do. The path is from my PC to my VBox, to the switch, to the CBand dish.

Sorry I didn't start a new thread. I thought since I was attempting to use the new device support this thread was appropriate.

Thanks for your help!

Mike
Technotrend S2-3200, Genpix, Skystar 2, Vbox, CBand and several KU dishes
Top
sebus
Just popping in
Posts:5
Joined:Wed Jun 04, 2008 1:02 pm

BDA Device Name: [Hauppauge 47xxx WinTV DVBS Tuner]

Postby sebus » Wed Jun 04, 2008 3:08 pm

This Connexant based device also does NOT work.
Only LNB1 is accessible

Here is attached log

Lets hope it will work one day

sebus
Attachments
bda.log.txt
(6.34KiB)Downloaded 2437 times
Hauppauge 47xxx WinTV DVBS Tuner
(Hauppauge Nova-S-USB2), Win XP SP2, ATI Mobile Radeon 9600, Vialuna SDS 424 WSG 4x1 DiSEqC Switch, 2 x dual Inverto Silver LNB on separate dishes, Astra 19.2 & Astra 28.2
Top
Leechmo
Just popping in
Posts:4
Joined:Fri Jun 13, 2008 6:19 am

bda.log for Geniatech Digistar/Digiwave 103g

Postby Leechmo » Fri Jun 13, 2008 9:12 am

The attached BDA logs were generated on a system using a Digiwave 103g/Geniatech Digistar REv2.2 using the 20070323 'Vista Certified' version of the Drivers available on the Geniatech Website.

I opened the program and then attempted to scan the first transponder on LNB2 (I am using a Dishpro Quad lnb). The scan returned the channels from the first transponder on LNB1 - indicating no switch occurred.

Upon reading the log I realised that although I had selected 'NA Bandstacked Dishpro Ku-Hi(DBS)' as my lnb/switch type, the Diseqc commands were being sent to the wrong address (10 as opposed to 11). So I also attempted it with RAW diseqc commands. Again the same rsult, the scanned channels returned were from LNB1.

The setup is working as intended in MyTheatre, so there is no chance it is a setup issue.

I am willing to do any testing necessary to get DvbDream working on my hardware, just let me know if you need anything else.
Top
Leechmo
Just popping in
Posts:4
Joined:Fri Jun 13, 2008 6:19 am

Postby Leechmo » Fri Jun 13, 2008 9:16 am

Attachment didn't take so I have enclosed it here:

'------------------------------------------------------------------------
'--START OF FIRST LOG without RAW commands
'------------------------------------------------------------------------

[06/13/08 09:22:27 : ] BDA 14:05
[06/13/08 09:22:27 : ] >> DeviceGetList
[06/13/08 09:22:27 : ] - Filter [Conexant BDA DVB-S Tuner/Demod]
[06/13/08 09:22:27 : ] << DeviceGetList
[06/13/08 09:22:27 : ] StartDevice() dwDeviceNo:0
[06/13/08 09:22:27 : ] >> DeviceGetList
[06/13/08 09:22:27 : ] - Filter [Conexant BDA DVB-S Tuner/Demod]
[06/13/08 09:22:27 : ] << DeviceGetList
[06/13/08 09:22:27 : 16] BDA Device Name: [Conexant BDA DVB-S Tuner/Demod] (Tuner Type:1)
[06/13/08 09:22:27 : 32] TuningSpace Name: 'Cable' NetworkType: {00000000-0000-0000-0000-000000000000}
[06/13/08 09:22:27 : 32] TuningSpace Name: 'Antenna' NetworkType: {00000000-0000-0000-0000-000000000000}
[06/13/08 09:22:27 : 32] TuningSpace Name: 'ATSC' NetworkType: {0DAD2FDD-5FD7-11D3-8F50-00C04F7971E2}
[06/13/08 09:22:27 : 32] TuningSpace Name: 'Digital Cable' NetworkType: {143827AB-F77B-498D-81CA-5A007AEC28BF}
[06/13/08 09:22:27 : 32] TuningSpace Name: 'AuxIn1' NetworkType: {00000000-0000-0000-0000-000000000000}
[06/13/08 09:22:27 : 32] TuningSpace Name: 'FM Radio' NetworkType: {00000000-0000-0000-0000-000000000000}
[06/13/08 09:22:27 : 32] TuningSpace Name: 'DVB-T' NetworkType: {216C62DF-6D7F-4E9A-8571-05F14EDB766A}
[06/13/08 09:22:27 : 32] TuningSpace Name: 'MYDVBS' NetworkType: {FA4B375A-45B4-4D45-8440-263957B11623}
[06/13/08 09:22:27 : 32] TuningSpace Name: 'DD2 DVB-S' NetworkType: {FA4B375A-45B4-4D45-8440-263957B11623}
[06/13/08 09:22:27 : 32] Enumeration found 9 tuning spaces
[06/13/08 09:22:27 : 32] Found TuningSpace
[06/13/08 09:22:27 : 32] BDACardType: 0
[06/13/08 09:22:27 : 47] GetTunerInterfaces: Pin types (2) :
[06/13/08 09:22:27 : 47] GetTunerInterfaces: Pin 0 Type = 0
[06/13/08 09:22:27 : 47] GetTunerInterfaces: Pin 1 Type = 1
[06/13/08 09:22:27 : 47] GetTunerInterfaces: Node types (2):
[06/13/08 09:22:27 : 47] GetTunerInterfaces: Node 0 Type = 0
[06/13/08 09:22:27 : 47] GetTunerInterfaces: Node 1 Type = 1
[06/13/08 09:22:27 : 47] GetTunerInterfaces: Node interfaces:
[06/13/08 09:22:27 : 47] GetTunerInterfaces: Interfaces on NodeType 0 (4 interfaces):
[06/13/08 09:22:27 : 47] GetTunerInterfaces: {992CF102-49F9-4719-A664-C4F23E2408F4} IID_IBDA_LNBInfo
[06/13/08 09:22:27 : 47] GetTunerInterfaces: {71985F47-1CA1-11D3-9CC8-00C04F7971E0} IID_IBDA_FrequencyFilter
[06/13/08 09:22:27 : 47] GetTunerInterfaces: {1347D106-CF3A-428A-A5CB-AC0D9A2A4338} IID_IBDA_SignalStatistics
[06/13/08 09:22:27 : 47] GetTunerInterfaces: {FAA8F3E5-31D4-4E41-88EF-D9EB716F6EC9} Unknown Interface - QueryInterface FAILED ! - hr = 0x80004002
[06/13/08 09:22:27 : 47] GetTunerInterfaces: Interfaces on NodeType 1 (3 interfaces):
[06/13/08 09:22:27 : 47] GetTunerInterfaces: {EF30F379-985B-4D10-B640-A79D5E04E1E0} IID_IBDA_DigitalDemodulator
[06/13/08 09:22:27 : 47] GetTunerInterfaces: {1347D106-CF3A-428A-A5CB-AC0D9A2A4338} IID_IBDA_SignalStatistics
[06/13/08 09:22:27 : 47] GetTunerInterfaces: {0FE4E87A-8E44-4E27-BE4A-4F03FC7D852B} Unknown Interface - QueryInterface FAILED ! - hr = 0x80004002
[06/13/08 09:22:27 : 79] StartDevice() OK
[06/13/08 09:22:27 : 79] ----------------------------------------------------------------------------
[06/13/08 09:22:27 : 79]
[06/13/08 09:22:28 : 1297] SendDiseqc() E0 10 38 F2 Len:4
[06/13/08 09:22:28 : 1297] SendDiseqc without raw diseqc, Diseqc:1
[06/13/08 09:22:28 : 1297] SendDiseqc() E0 10 38 F2 Len:4
[06/13/08 09:22:28 : 1297] SendDiseqc without raw diseqc, Diseqc:1
[06/13/08 09:22:28 : 1297]
[06/13/08 09:22:28 : 1297] SetTuner() 12297000, 268539604, 20000000 LOF:14350000 22Khz:0
[06/13/08 09:22:28 : 1297] pBDAFrequencyFilter->put_Range(0x0000)
[06/13/08 09:22:28 : 1766] Status: Locked
[06/13/08 09:22:28 : 1797] Locked bSignalLocked:1 bSignalPresent:1 lStrength:0 lQuality:100
[06/13/08 09:22:43 : 16766] SendDiseqc() E0 10 38 F6 Len:4
[06/13/08 09:22:43 : 16766] SendDiseqc without raw diseqc, Diseqc:2
[06/13/08 09:22:43 : 16766] SendDiseqc() E0 10 38 F6 Len:4
[06/13/08 09:22:43 : 16766] SendDiseqc without raw diseqc, Diseqc:2
[06/13/08 09:22:43 : 16766]
[06/13/08 09:22:43 : 16766] SetTuner() 12224000, 268539604, 20000000 LOF:11250000 22Khz:0
[06/13/08 09:22:43 : 16766] pBDAFrequencyFilter->put_Range(0x0001)
[06/13/08 09:22:44 : 17250] Status: Locked
[06/13/08 09:22:44 : 17282] Locked bSignalLocked:1 bSignalPresent:1 lStrength:0 lQuality:100
[06/13/08 09:24:16 : 109188] SendDiseqc() E0 10 38 F2 Len:4
[06/13/08 09:24:16 : 109188] SendDiseqc without raw diseqc, Diseqc:1
[06/13/08 09:24:16 : 109188] SendDiseqc() E0 10 38 F2 Len:4
[06/13/08 09:24:16 : 109188] SendDiseqc without raw diseqc, Diseqc:1

'------------------------------------------------------------------------
'--START OF SECOND LOG with RAW commands
'------------------------------------------------------------------------

[06/13/08 10:16:16 : ] BDA 14:05
[06/13/08 10:16:16 : ] >> DeviceGetList
[06/13/08 10:16:16 : ] - Filter [Conexant BDA DVB-S Tuner/Demod]
[06/13/08 10:16:16 : ] << DeviceGetList
[06/13/08 10:16:16 : ] StartDevice() dwDeviceNo:0
[06/13/08 10:16:16 : ] >> DeviceGetList
[06/13/08 10:16:16 : ] - Filter [Conexant BDA DVB-S Tuner/Demod]
[06/13/08 10:16:16 : ] << DeviceGetList
[06/13/08 10:16:16 : 15] BDA Device Name: [Conexant BDA DVB-S Tuner/Demod] (Tuner Type:1)
[06/13/08 10:16:16 : 15] TuningSpace Name: 'Cable' NetworkType: {00000000-0000-0000-0000-000000000000}
[06/13/08 10:16:16 : 15] TuningSpace Name: 'Antenna' NetworkType: {00000000-0000-0000-0000-000000000000}
[06/13/08 10:16:16 : 15] TuningSpace Name: 'ATSC' NetworkType: {0DAD2FDD-5FD7-11D3-8F50-00C04F7971E2}
[06/13/08 10:16:16 : 15] TuningSpace Name: 'Digital Cable' NetworkType: {143827AB-F77B-498D-81CA-5A007AEC28BF}
[06/13/08 10:16:16 : 15] TuningSpace Name: 'AuxIn1' NetworkType: {00000000-0000-0000-0000-000000000000}
[06/13/08 10:16:16 : 15] TuningSpace Name: 'FM Radio' NetworkType: {00000000-0000-0000-0000-000000000000}
[06/13/08 10:16:16 : 15] TuningSpace Name: 'DVB-T' NetworkType: {216C62DF-6D7F-4E9A-8571-05F14EDB766A}
[06/13/08 10:16:16 : 15] TuningSpace Name: 'MYDVBS' NetworkType: {FA4B375A-45B4-4D45-8440-263957B11623}
[06/13/08 10:16:16 : 15] TuningSpace Name: 'DD2 DVB-S' NetworkType: {FA4B375A-45B4-4D45-8440-263957B11623}
[06/13/08 10:16:16 : 15] Enumeration found 9 tuning spaces
[06/13/08 10:16:16 : 15] Found TuningSpace
[06/13/08 10:16:16 : 15] BDACardType: 0
[06/13/08 10:16:16 : 15] GetTunerInterfaces: Pin types (2) :
[06/13/08 10:16:16 : 15] GetTunerInterfaces: Pin 0 Type = 0
[06/13/08 10:16:16 : 15] GetTunerInterfaces: Pin 1 Type = 1
[06/13/08 10:16:16 : 15] GetTunerInterfaces: Node types (2):
[06/13/08 10:16:16 : 15] GetTunerInterfaces: Node 0 Type = 0
[06/13/08 10:16:16 : 15] GetTunerInterfaces: Node 1 Type = 1
[06/13/08 10:16:16 : 15] GetTunerInterfaces: Node interfaces:
[06/13/08 10:16:16 : 15] GetTunerInterfaces: Interfaces on NodeType 0 (4 interfaces):
[06/13/08 10:16:16 : 15] GetTunerInterfaces: {992CF102-49F9-4719-A664-C4F23E2408F4} IID_IBDA_LNBInfo
[06/13/08 10:16:16 : 15] GetTunerInterfaces: {71985F47-1CA1-11D3-9CC8-00C04F7971E0} IID_IBDA_FrequencyFilter
[06/13/08 10:16:16 : 15] GetTunerInterfaces: {1347D106-CF3A-428A-A5CB-AC0D9A2A4338} IID_IBDA_SignalStatistics
[06/13/08 10:16:16 : 15] GetTunerInterfaces: {FAA8F3E5-31D4-4E41-88EF-D9EB716F6EC9} Unknown Interface - QueryInterface FAILED ! - hr = 0x80004002
[06/13/08 10:16:16 : 15] GetTunerInterfaces: Interfaces on NodeType 1 (3 interfaces):
[06/13/08 10:16:16 : 15] GetTunerInterfaces: {EF30F379-985B-4D10-B640-A79D5E04E1E0} IID_IBDA_DigitalDemodulator
[06/13/08 10:16:16 : 15] GetTunerInterfaces: {1347D106-CF3A-428A-A5CB-AC0D9A2A4338} IID_IBDA_SignalStatistics
[06/13/08 10:16:16 : 15] GetTunerInterfaces: {0FE4E87A-8E44-4E27-BE4A-4F03FC7D852B} Unknown Interface - QueryInterface FAILED ! - hr = 0x80004002
[06/13/08 10:16:16 : 47] StartDevice() OK
[06/13/08 10:16:16 : 47] ----------------------------------------------------------------------------
[06/13/08 10:16:16 : 47]
[06/13/08 10:16:17 : 640] SendDiseqc() E0 11 38 F2 Len:4
[06/13/08 10:16:17 : 640] SendDiseqc without raw diseqc, Diseqc:1
[06/13/08 10:16:17 : 843] SendDiseqc() E0 11 38 F2 Len:4
[06/13/08 10:16:17 : 843] SendDiseqc without raw diseqc, Diseqc:1
[06/13/08 10:16:17 : 1047] SendDiseqc() E0 10 38 F2 Len:4
[06/13/08 10:16:17 : 1047] SendDiseqc without raw diseqc, Diseqc:1
[06/13/08 10:16:17 : 1047] SendDiseqc() E0 10 38 F2 Len:4
[06/13/08 10:16:17 : 1047] SendDiseqc without raw diseqc, Diseqc:1
[06/13/08 10:16:17 : 1047]
[06/13/08 10:16:17 : 1047] SetTuner() 12297000, 268539604, 20000000 LOF:14350000 22Khz:0
[06/13/08 10:16:17 : 1047] pBDAFrequencyFilter->put_Range(0x0000)
[06/13/08 10:16:18 : 1515] Status: Locked
[06/13/08 10:16:18 : 1547] Locked bSignalLocked:1 bSignalPresent:1 lStrength:0 lQuality:100
[06/13/08 10:16:47 : 31187] SendDiseqc() E0 11 38 F6 Len:4
[06/13/08 10:16:47 : 31187] SendDiseqc without raw diseqc, Diseqc:2
[06/13/08 10:16:48 : 31390] SendDiseqc() E0 11 38 F6 Len:4
[06/13/08 10:16:48 : 31390] SendDiseqc without raw diseqc, Diseqc:2
[06/13/08 10:16:48 : 31593] SendDiseqc() E0 10 38 F6 Len:4
[06/13/08 10:16:48 : 31593] SendDiseqc without raw diseqc, Diseqc:2
[06/13/08 10:16:48 : 31593] SendDiseqc() E0 10 38 F6 Len:4
[06/13/08 10:16:48 : 31593] SendDiseqc without raw diseqc, Diseqc:2
[06/13/08 10:16:48 : 31593]
[06/13/08 10:16:48 : 31593] SetTuner() 12224000, 268539604, 20000000 LOF:11250000 22Khz:0
[06/13/08 10:16:48 : 31593] pBDAFrequencyFilter->put_Range(0x0001)
[06/13/08 10:16:48 : 32078] Status: Locked
[06/13/08 10:16:48 : 32109] Locked bSignalLocked:1 bSignalPresent:1 lStrength:0 lQuality:100
[06/13/08 10:18:19 : 122640] SendDiseqc() E0 11 38 F2 Len:4
[06/13/08 10:18:19 : 122640] SendDiseqc without raw diseqc, Diseqc:1
[06/13/08 10:18:19 : 122843] SendDiseqc() E0 11 38 F2 Len:4
[06/13/08 10:18:19 : 122843] SendDiseqc without raw diseqc, Diseqc:1
[06/13/08 10:18:19 : 123047] SendDiseqc() E0 10 38 F2 Len:4
[06/13/08 10:18:19 : 123047] SendDiseqc without raw diseqc, Diseqc:1
[06/13/08 10:18:19 : 123047] SendDiseqc() E0 10 38 F2 Len:4
[06/13/08 10:18:19 : 123047] SendDiseqc without raw diseqc, Diseqc:1
[06/13/08 10:18:19 : 123047]
[06/13/08 10:18:19 : 123047] SetTuner() 12297000, 268539604, 20000000 LOF:14350000 22Khz:0
[06/13/08 10:18:19 : 123047] pBDAFrequencyFilter->put_Range(0x0000)
[06/13/08 10:18:20 : 123547] Status: Locked
[06/13/08 10:18:20 : 123562] Locked bSignalLocked:1 bSignalPresent:1 lStrength:0 lQuality:100
[06/13/08 10:18:21 : 125062] StopDevice()
Top
User avatar
rel
relocation
Posts:2051
Joined:Fri Jun 16, 2006 9:50 am

Re: bda.log for Geniatech Digistar/Digiwave 103g

Postby rel » Fri Jun 13, 2008 10:46 pm

The attached BDA logs were generated on a system using a Digiwave 103g/Geniatech Digistar REv2.2 using the 20070323 'Vista Certified' version of the Drivers available on the Geniatech Website.

I opened the program and then attempted to scan the first transponder on LNB2 (I am using a Dishpro Quad lnb). The scan returned the channels from the first transponder on LNB1 - indicating no switch occurred.

Upon reading the log I realised that although I had selected 'NA Bandstacked Dishpro Ku-Hi(DBS)' as my lnb/switch type, the Diseqc commands were being sent to the wrong address (10 as opposed to 11). So I also attempted it with RAW diseqc commands. Again the same rsult, the scanned channels returned were from LNB1.

The setup is working as intended in MyTheatre, so there is no chance it is a setup issue.

I am willing to do any testing necessary to get DvbDream working on my hardware, just let me know if you need anything else.

try this patch
Attachments
bda_2008_06_14b.rar
bda device update
(58.54KiB)Downloaded 4377 times
DVB Dream - because I have to dream about having time to code it
Top
Leechmo
Just popping in
Posts:4
Joined:Fri Jun 13, 2008 6:19 am

working with Digiwave 103g/Geniatech Digistar

Postby Leechmo » Sat Jun 14, 2008 4:46 am

bda_2008_06_14b is Working perfectly now with my setup on a Digiwave 103g (rebranded Geniatech Digistar Rev 2.2)

for additional information I have tested it using a Dishpro Quad LNB. I have changed my Diseqc settings for switch to 'None' to avoid the secondary calls when using RAW and now have it set up as:

LNB1 NA Bandstacked DBS - RAW Diseqc : E0 11 38 F0
LNB2 NA BandStacked DBS - RAW Diseqc : E0 11 38 F4

Thanks alot for the update, I've been envious of DvbDream's features for quite a while but the lack of diseqc support was holding me back. Now to play with/learn a brand new dvb setup :D
Top
Post Reply

Return to “HOT FIXES / PATCHES and Test Versions”

Who is online

Users browsing this forum: No registered users and 1 guest