Diseqc patch for Hauppauge and Geniatech BDA drivers

Test version are publicly available test versions of the updates (patches like a, b, c, d...) and uploaded here for users to test/confirm the bug fixes before the release versions.

Moderators: FredB, X05, Dreamer

sebus
Just popping in
Posts: 5
Joined: Wed Jun 04, 2008 1:02 pm

Postby sebus » Sat Jun 14, 2008 11:09 am

NO go with Hauppauge Nova-S-USB2

17485] FAILED: Hauppauge KSPROPERTY_HP_DISEQC not supported!
17485] FAILED: property_set_send_diseqc()
17485] SendDiseqc() E0 10 38 F6 Len:4
17485] hauppauge_send_diseqc

17485] FAILED: Hauppauge KSPROPERTY_HP_DISEQC not supported!
17485] FAILED: property_set_send_diseqc()
18487]
18487] SetTuner() 10803000, H, 22000000 LOF:9750000 22Khz:0
18487] FAILED: hauppauge KSPROPERTY_HP_PILOT not supported!
19759] SendDiseqc() E0 10 38 F6 Len:4
19759] hauppauge_send_diseqc

19759] FAILED: Hauppauge KSPROPERTY_HP_DISEQC not supported!
19759] FAILED: property_set_send_diseqc()
25627] Status: No lock
37584] SendDiseqc() E0 10 38 F0 Len:4
37584] hauppauge_send_diseqc

Hauppauge 47xxx WinTV DVBS Tuner
(Hauppauge Nova-S-USB2), Win XP SP2, ATI Mobile Radeon 9600, Vialuna SDS 424 WSG 4x1 DiSEqC Switch, 2 x dual Inverto Silver LNB on separate dishes, Astra 19.2 & Astra 28.2
adi32
Not too shy to talk
Posts: 16
Joined: Sun Jun 29, 2008 3:11 am

Postby adi32 » Wed Jul 02, 2008 11:29 pm

its ok now with new bda
HAUPAUGE XP PRO
madas
Posts: 2
Joined: Thu Jul 10, 2008 8:03 pm

Postby madas » Thu Jul 10, 2008 8:10 pm

Same problem as Sebus

07/10/08 23:06:00 : 14976] FAILED: Hauppauge KSPROPERTY_HP_DISEQC not supported!
[07/10/08 23:06:00 : 14976] FAILED: property_set_send_diseqc()
[07/10/08 23:06:00 : 15179] SendDiseqc() E0 10 38 F6 Len:4
[07/10/08 23:06:00 : 15179] hauppauge_send_diseqc

Is this fixable? this is the only thing stopping me from using DVBDream. It works fine under MT
47xxx Hauppauge WinTV Nova-S-USB2
getstarted
Just popping in
Posts: 4
Joined: Mon Jul 21, 2008 7:43 pm

does this patch work with 1027 card?

Postby getstarted » Thu Aug 07, 2008 9:07 pm

I have twinhan 1027 card. I am not getting anything with the latest download on this site. can I try this patch for the card? what codecs do you use for best quality? Thanks,
Hauppauge HVR-1600; Twinhan 1027
Vista Ultimate; AMD 3.0 Dual Core; Gigabyte mb with onboard video; HDMI; panasonic 50" Plasma;
tsuda
Just popping in
Posts: 3
Joined: Sun Aug 24, 2008 5:05 pm

Re: Diseqc patch for Hauppauge and Geniatech BDA drivers

Postby tsuda » Sun Aug 24, 2008 5:14 pm

Thanks very much for this patch!!!

I'm a newbie - just bought my first card a few days ago, a Geniatech Digistar 3 DVB-S PCI card. I tried ProgDVB, myTheatre, mediaportal, and DVB Dream. I like DVB Dream the best, but I could not get it to scan the channels, until I found this patch.

I have tried the latest bda.dev.20080614 on both xp sp3 and vista sp1. It works very well! I'm still missing some channels and cannot get it to scan certain tp's, but with the patch it got most of the channels.

It took me a while to figure out the configuration so I'd like to share them here:

- 110W
- LNB: NA Legacy
- raw diseqc command: e0 11 38 f4
- uncommitted switch port: 2
- 119W
- LNB: NA Legacy
- raw diseqc command: e0 11 38 f8
- uncommitted switch port: 3

Thanks again for this wonderful program and the patch to support Geniatech cards!!!
card: Geniatech Digistar 3 DVB-S PCI Card
os: Windows XP SP3 / Vista Ultimate SP1
mb: Asus P5L-MX with Intel 945G chipset
Sats: 110W and 119W with diseqc and normal LNB
JerryPL
Just popping in
Posts: 3
Joined: Thu May 15, 2008 4:18 pm

Pinnacle PCTV 7010ix

Postby JerryPL » Sun Aug 31, 2008 12:28 pm

Is possible to get this work with Pinnacle PCTV 7010ix ?
Pinnacle pctv 7010ix
herrdude
Posts: 2
Joined: Sat Oct 18, 2008 10:42 am

Re: Diseqc patch for Hauppauge and Geniatech BDA drivers

Postby herrdude » Sat Oct 18, 2008 10:54 am

tsuda wrote:
It took me a while to figure out the configuration so I'd like to share them here:

- 110W
- LNB: NA Legacy
- raw diseqc command: e0 11 38 f4
- uncommitted switch port: 2
- 119W
- LNB: NA Legacy
- raw diseqc command: e0 11 38 f8
- uncommitted switch port: 3

Thanks again for this wonderful program and the patch to support Geniatech cards!!!

Thanks for the tip, but I can't manage to get it to switch from one LNB to another.
How does this work exactly? In DVBDream do you actually choose a diseqc switch or not? Or do you just choose uncommitted ports only? Why did you choose port 2 and 3? Is that how your LNBs are hooked up to your switch?

In my case, I have one LNB hooked up to port 1 of my diseqc and another one hooked up to port 2. No matter how I set it up it ultimately ends up scanning the first LNB. It never scans the second one. However, it does scan both in mytheatre.

Any tips or disgruntled suggestions will be greatly appreciated!

Thanks
SkyStar 2
Geniatech 108g
Windows XP
Diseqc 4x1
herrdude
Posts: 2
Joined: Sat Oct 18, 2008 10:42 am

Re: Diseqc patch for Hauppauge and Geniatech BDA drivers

Postby herrdude » Sat Oct 18, 2008 10:54 am

tsuda wrote:
It took me a while to figure out the configuration so I'd like to share them here:

- 110W
- LNB: NA Legacy
- raw diseqc command: e0 11 38 f4
- uncommitted switch port: 2
- 119W
- LNB: NA Legacy
- raw diseqc command: e0 11 38 f8
- uncommitted switch port: 3

Thanks again for this wonderful program and the patch to support Geniatech cards!!!

Thanks for the tip, but I can't manage to get it to switch from one LNB to another.
How does this work exactly? In DVBDream do you actually choose a diseqc switch or not? Or do you just choose uncommitted ports only? Why did you choose port 2 and 3? Is that how your LNBs are hooked up to your switch?

In my case, I have one LNB hooked up to port 1 of my diseqc and another one hooked up to port 2. No matter how I set it up it ultimately ends up scanning the first LNB. It never scans the second one. However, it does scan both in mytheatre.

Any tips or disgruntled suggestions will be greatly appreciated!

Thanks
SkyStar 2

Geniatech 108g

Windows XP

Diseqc 4x1
tsuda
Just popping in
Posts: 3
Joined: Sun Aug 24, 2008 5:05 pm

Postby tsuda » Tue Oct 21, 2008 1:28 pm

hi herrdude,

Have you tried the following?

Port 1:
- LNB: NA Legacy
- raw diseqc command: e0 11 38 f0
- uncommitted switch port: 1

Port 2:
- 119W
- LNB: NA Legacy
- raw diseqc command: e0 11 38 f4
- uncommitted switch port: 2
card: Geniatech Digistar 3 DVB-S PCI Card

os: Windows XP SP3 / Vista Ultimate SP1

mb: Asus P5L-MX with Intel 945G chipset

Sats: 110W and 119W with diseqc and normal LNB
herrdude
Posts: 2
Joined: Sat Oct 18, 2008 10:42 am

Postby herrdude » Fri Oct 24, 2008 10:58 am

hmmmm, nope that didn't work. It keeps scanning the same satellite, the one on port 1.

Can't figure out why...

Any ideas?
SkyStar 2

Geniatech 108g

Windows XP

Diseqc 4x1
tsuda
Just popping in
Posts: 3
Joined: Sun Aug 24, 2008 5:05 pm

Postby tsuda » Thu Nov 06, 2008 6:35 pm

herrdude wrote:hmmmm, nope that didn't work. It keeps scanning the same satellite, the one on port 1.

Can't figure out why...

Any ideas?


What brand of diseqc switch do you have?
card: Geniatech Digistar 3 DVB-S PCI Card

os: Windows XP SP3 / Vista Ultimate SP1

mb: Asus P5L-MX with Intel 945G chipset

Sats: 110W and 119W with diseqc and normal LNB
sebus
Just popping in
Posts: 5
Joined: Wed Jun 04, 2008 1:02 pm

Postby sebus » Wed Dec 10, 2008 9:58 am

I gave up on the switch & use motor, but for all of you still having problems you can try the driver from here:

http://www.dvbdream.de/forum_thread_2291_30.html

or

http://www.alsat.co.uk/forum/showthread.php?t=168599
Hauppauge 47xxx WinTV DVBS Tuner

(Hauppauge Nova-S-USB2), Win XP SP2, ATI Mobile Radeon 9600, Vialuna SDS 424 WSG 4x1 DiSEqC Switch, 2 x dual Inverto Silver LNB on separate dishes, Astra 19.2 & Astra 28.2
halinka1125
Posts: 1
Joined: Tue Jan 06, 2009 7:42 am

Postby halinka1125 » Thu Jan 08, 2009 6:25 am

Hello

I have Pinnacle 7010ix tuner card, is work perfectly with this driver.
But have no diseqc control. Can anybody help me?

I use BlackGold BTG3540 driver 6.0.0.39 32bit on XP.
My other HW is Gigabyte MA-790X-DS4, A64-X2 5000, Radeon X1950Pro, 4GB DDR800. 4 port diseqc switch.

Link to my tuner driver: http://blackgold.fileburst.com/download ... _32bit.zip
(work more stable, and without suprise`s than orginal 7010ix driver).
(In this archive is *.map file with offsets - maybe helpfull in programming.)

Log, from bda.dev is attached to reply.

Best Regards
halinka1125

Sorry for my pure english.
Attachments
bda.log.txt
(7.16 KiB) Downloaded 374 times
Pinnacle 7010ix 6in1 Bda tuner (2x DVB-S, 2x DVB-T,2x Analog) Drivers from BlackGold 6in1 card. 4DiseqC SW, 5E,13E,19.2E,23.8E, AMD-5000X2, MA-790X MB.
hoppy
Just popping in
Posts: 3
Joined: Wed Apr 15, 2009 7:03 am

Postby hoppy » Thu Apr 16, 2009 6:23 pm

nope it does not work with Digiwave DGL1189 universal linear/circular lnb
Hauppauge WinTV Nova-S-Plus
G-Force TI4200
DISEQC 4X1 SWITCH
SIGNAL STANDARD LEGACY LNB WITH 2 OUTPUTS
UNIVERSAL LNB WITH 2 OUTPUTS
Puzo
Posts: 1
Joined: Thu Aug 27, 2009 10:40 am
Location: Russia, Tikhoretsk
Contact:

Postby Puzo » Fri Aug 28, 2009 11:57 pm

Thank You... :wink:
Skystar2+Skystar3 DVB-S / Pentium4 - 2048 Mb DDR - Integrated video
-----------------------------------------------------------------------
Collective installation with 4 LNB Quad Diseq - LNB A = LM1 75.0°E - LNB B = Express AM2 80.0°E - LNB C = Hotbird 13.0°E - LNB D = Intelsat 904 60°E

Return to “HOT FIXES / PATCHES and Test Versions”

Who is online

Users browsing this forum: No registered users and 1 guest