Page 1 of 1

DVBWorld latest BDA device interface for DD (05.04.2009)

Posted: Sun Apr 05, 2009 9:33 am
by rel
I have completed support for all DVBWorld DVB-S, DVB-S2, PCI and PCI -Express cards, and remote support too.


here is the latest BDA device interface for DVB Dream:

(to be put into dvbdream\devices folder)


http://www.dvbdream.org/files/bda_2009_04_05.rar


- DVBWorld DVB-S2 bug fixed
- DVBWorld remote controls are now supported


Please test and let me know if you find any problem


I'll work on CI support later.

Posted: Sun Apr 05, 2009 6:14 pm
by starman
Thanks for your efforts.
I have a Dvbworld 2004PCI dvb-s2 device. I can say, the bda.dev file now enables scanning and viewing of dvb-s2 channels just fine. I can't say about remote support, I've never used the remote.
I used raw diseqc commands with my Genpix device to move my 10 foot c/ku band dish, but it doesn't seem to work with the Dvbworld device. The device moves the dish fine with Mytheatre 4.0 beta 11 and Dvbviewer 4.0 Beta 1.4.0 Is it possible Dvbdream could do this also?

Posted: Fri Apr 10, 2009 2:12 am
by ScanMan
I've tested the version 2.3 with my Technotrend S2-3200.
Result: No more receiving of HD-Programms :shock:

BDA-LOG says: Tuner is not locked.
What's happend ?

Does new BDA driver supports Multytenne diseqc?

Posted: Sun Apr 12, 2009 1:54 am
by HAWKHAWK
Thx for the new driver. I installed it (BDA 2.3.0?) and tried to use my brand new Technisat Multytenne. It is mounted perfectly, I get all 4 sats (13/19,2/23,5/28,2) on a connected Dreambox.

In DVBDream however, I only see Astra 19.2. When using the diseqc, nothing seems to happen, only Astra 19.2 is scanned.

Any thought? I also tried BDA_ALL, same results.

TIA

regards

Posted: Sun Apr 12, 2009 1:54 pm
by starman
Thanks for your efforts.
I have a Dvbworld 2004PCI dvb-s2 device. I can say, the bda.dev file now enables scanning and viewing of dvb-s2 channels just fine. I can't say about remote support, I've never used the remote.
I used raw diseqc commands with my Genpix device to move my 10 foot c/ku band dish, but it doesn't seem to work with the Dvbworld device. The device moves the dish fine with Mytheatre 4.0 beta 11 and Dvbviewer 4.0 Beta 1.4.0 Is it possible Dvbdream could do this also?
Update:
I took my Dvbworld 2004 PCI device out and hooked up my Dvbworld 2104 USB device and it works perfectly with diSEqC control of my motor and switch. I am using raw DiSEqC commands.Thanks!

Posted: Wed Apr 22, 2009 11:33 am
by rel
I've tested the version 2.3 with my Technotrend S2-3200.
Result: No more receiving of HD-Programms :shock:

BDA-LOG says: Tuner is not locked.
What's happend ?
Hey Scanman, can you send me Tuner & Capture BDA filter names for TT s2-3200 ? I'll try to fix it.


@starman, so diseqc doesnt work with DVBWorld PCI version at all ? weird

Posted: Sun May 03, 2009 4:18 pm
by starman
I've tested the version 2.3 with my Technotrend S2-3200.
Result: No more receiving of HD-Programms :shock:

BDA-LOG says: Tuner is not locked.
What's happend ?
Hey Scanman, can you send me Tuner & Capture BDA filter names for TT s2-3200 ? I'll try to fix it.


@starman, so diseqc doesnt work with DVBWorld PCI version at all ? weird
My 2004 bit the dust, no longer will tune anything in any application so I'm not sure if its not working in Dvbdream was part of it failing anyway. At any rate, my Dvbworld 2104 usb works fine with the new bda.dev