I'm using DVBdream to watch mainly Greek Nova Channels on Hotbird.
Since last week, Alpha TV is facing a freeze every one or two seconds so it's impossible to view it anymore.
The same was happening for Motors TV and Supersport 4 in the past also, but since I don't care for them, I never asked before.
The point is that AltDVB or ProgDVB can decode those channels without error, so I am convinced that something goes wrong only in DVBDream .
I contacted Nova (I am a legal subscriber) but they couldn't help either. They say that nothing changed from their end though I believe that must be something from the transmission that triggered the problem.
I tried to change some things on channel properties, like QPSK and FEC but nothing happened.
Any ideas or suggestions?
As I am a programmer myself, is there somewhere I can find the source code of DVBDream to try to locate the problem?
Thanks,
Paul
Freezes on some channels
Moderators:X05, Dreamer, FredB
-
- Not too shy to talk
- Posts:19
- Joined:Sun Feb 18, 2007 2:47 am
SKYSTAR2 :: SKYSTAR HD2 :: HAUPPAUGE HVR-900 :: AMD X2 3800 :: WINXPSP2 :: 2GB RAM
weird, I suppose you must have already tried other video/audio codecs and renderers. check for any packet loss in Main Menu->Analysis->Pid statistics. Yo must see 0 in both Con.Error and Strm.Err columns for all pids.Since last week, Alpha TV is facing a freeze every one or two seconds so it's impossible to view it anymore. .... Any ideas or
suggestions?
Con.Error = Continuity error (packet losses)
Strm.Error = Stream error (uncorrectable errors found in receieved stream, i.e. possible errors related to signal level)
also check your CPU usage during freeze.
No, it is not an open source applicationAs I am a programmer myself, is there somewhere I can find the source code of DVBDream to try to locate the problem?
DVB Dream - because I have to dream about having time to code it
-
- Not too shy to talk
- Posts:19
- Joined:Sun Feb 18, 2007 2:47 am
Re: Freezes
Thank you for your reply,
From what I saw on PID analysis there is no streaming problems and the cpu load never exceeds 0.03 (see attached image)
forgot to mention in my previous post that I have 2 pci tuners, a Skystar2 and a K-World DVB100-S. I also tried to switch between various drivers (4.4.1 of skystar, beta bda of skystar, original bda of DVBDream and latest scanman's bda) but the problem is always there.
Strange thing is that the others channels of the same transponder have not any problem!
What you think is the reason to make AltDVB and ProgDVB work without this symptom? (I know you may have no clue what they do in their programs, but as a guess maybe?)
From what I saw on PID analysis there is no streaming problems and the cpu load never exceeds 0.03 (see attached image)
forgot to mention in my previous post that I have 2 pci tuners, a Skystar2 and a K-World DVB100-S. I also tried to switch between various drivers (4.4.1 of skystar, beta bda of skystar, original bda of DVBDream and latest scanman's bda) but the problem is always there.
Strange thing is that the others channels of the same transponder have not any problem!
What you think is the reason to make AltDVB and ProgDVB work without this symptom? (I know you may have no clue what they do in their programs, but as a guess maybe?)
You do not have the required permissions to view the files attached to this post.
SKYSTAR2 :: SKYSTAR HD2 :: HAUPPAUGE HVR-900 :: AMD X2 3800 :: WINXPSP2 :: 2GB RAM
Try to switch the Full TS mode in menu > Options > Device Options > Options. I've had a similar problem, Full TS must be disabled for some channels and enabled for others, especially when using PIP.
More here: http://www.dvbdream.org/forum/viewtopic.php?t=283
More here: http://www.dvbdream.org/forum/viewtopic.php?t=283
Dreamer
-
- Not too shy to talk
- Posts:19
- Joined:Sun Feb 18, 2007 2:47 am
No
Unfortunately it's not that.
First of all I have 2 cards.
One of them, the K-World DVB100S does not have options at all in the device menu, and the second which is a skystar2 and supports device options, it had Full TS disabled already.
When I enabled it, it could not even tune on Alpha!
So it's definitely a streaming problem..
First of all I have 2 cards.
One of them, the K-World DVB100S does not have options at all in the device menu, and the second which is a skystar2 and supports device options, it had Full TS disabled already.
When I enabled it, it could not even tune on Alpha!
So it's definitely a streaming problem..
SKYSTAR2 :: SKYSTAR HD2 :: HAUPPAUGE HVR-900 :: AMD X2 3800 :: WINXPSP2 :: 2GB RAM
The new internal MPEG2 demuxer in v1.4 might help about this issue . I have a suspection this was related to MPEG2-Demultiplexer , which DD was using so far (maybe the difference between DD and many other applications)I'm using DVBdream to watch mainly Greek Nova Channels on Hotbird.
Since last week, Alpha TV is facing a freeze every one or two seconds so it's impossible to view it anymore.
The same was happening for Motors TV and Supersport 4 in the past also, but since I don't care for them, I never asked before.
The point is that AltDVB or ProgDVB can decode those channels without error, so I am convinced that something goes wrong only in DVBDream .
I am moving this post to done section , so check in v1.4 and let me know.
DVB Dream - because I have to dream about having time to code it
Who is online
Users browsing this forum: No registered users and 1 guest