1.5c disecqc problem on start up

Fixed bugs & the feature requests that have been implemented. Section is just to inform users during version changes.

Moderators: Dreamer, FredB, X05

hypermood
Not too shy to talk
Posts: 10
Joined: Wed Oct 29, 2008 2:46 am

1.5c disecqc problem on start up

Postby hypermood » Tue May 25, 2010 6:36 am

I have three sats on a diseqc.
1) Hotbird 13.0
2) Astra 19.2
3) Astra 28.2
I have to tune to to a hotbird channel before I can tune to the Astra channels. If DD starts on an Astra channel then there will be no signal until I tune to a hotbird channel and then go back to the Astra channel. This is a nuisance in timed recordings and I'm using a workround of setting a timer recording of just one minute from a hotbird channel before setting the timer to the channel I want to record. I then set a further recording of a minute to a hotbird channel so that DD closes on a tunable channel.

Skystar HD BDA Driver 4.4.10.18
WinXP
Asta1 Astra2 Hotbird
User avatar
Dreamer
Moderator
Posts: 1214
Joined: Fri Jun 16, 2006 5:46 pm

Postby Dreamer » Wed Jul 07, 2010 12:13 pm

Have you tried Scanman's device? It works good with SS HD2.
Dreamer
Yany
Just popping in
Posts: 4
Joined: Sat Jul 10, 2010 6:01 am

Postby Yany » Sun Jul 11, 2010 1:28 pm

Diseqc problems here also. Skystar HD2.

- "Go to" not working correctly, moves antenna few degrees off, works just few times, than stops
- "drive" works few times, than stops and I have to restart PC

Tried Scanmans 1.06, 1.08, 1.1.1, first doesn´t work, second crashes while scanning, last one hangs DD on startup, if not, crashes on channel changing.
Skystar HD2, Win7/x64
User avatar
rel
relocation
Posts: 2051
Joined: Fri Jun 16, 2006 9:50 am

Postby rel » Sat Sep 04, 2010 8:50 am

please test with v1.5e or above
DVB Dream - because I have to dream about having time to code it

Return to “Done”

Who is online

Users browsing this forum: No registered users and 1 guest