Is DD dependent on the alignment of the planets or the tides to function properly?
Timeshifting is iffy at best: after watching TV for more than an hour it seems to stop working altogether, if I try to rewind or fast-forward it umps around at random.
Same thing for keyboard shortcuts: help file says to use SHIFT-LEFT or RIGHT to go back or forward in timeshift, but they stop WORKINg after a short while (no reason, just because!!). i saw in a post here to use CTL-SHIFT-LEFT and RIGHT instead. but that jumps too far back or ahead. And SPACE, which is supposed to start and stop timeshifting, does absolutely nothing at all.
I'd like to keep using DD, but i want to know if this is something I need to work out on my end. Frankly, if this is a problem with DD I'm not going to spend another minute wasting time with buggy software (MT is worst, it actually CHARGES for its bugs!).
Timeshift and keyboard shortcuts that don't work?
Moderators:X05, Dreamer, FredB
-
- Just popping in
- Posts:8
- Joined:Wed May 09, 2007 4:09 pm
HARDWARE:
Skystar 2 rev. 2.6b (driver 4.4.0.0)
Dishpro twin LNB (BEV 91 + 82)
AMD Athlon64 3200+
2 GB RAM
300 GB HDD
Nvidia GeForce 7600gs
Sony 55" HDTV (DVI to HDMI)
s/pdif audio
SOFTWARE:
Nvidia PureVideo codec
WinXP pro
MyTheatre 3.38
DVBDREAM 1.3c
Skystar 2 rev. 2.6b (driver 4.4.0.0)
Dishpro twin LNB (BEV 91 + 82)
AMD Athlon64 3200+
2 GB RAM
300 GB HDD
Nvidia GeForce 7600gs
Sony 55" HDTV (DVI to HDMI)
s/pdif audio
SOFTWARE:
Nvidia PureVideo codec
WinXP pro
MyTheatre 3.38
DVBDREAM 1.3c
From DD Help:
"SPACE= Stop Auto-Zapper
PAUSE = start (and stop) timeshifting
CTRL + SHIFT + LEFT = rewind (5%)
CTRL + SHIFT + RIGHT = forward (5%)
CTRL + SHIFT + UP = goto start
CTRL + SHIFT + DOWN = goto end (live)"
Timeshift is not perfect, few timeshift topics (suggestions and bugs):
http://www.dvbdream.org/forum/viewtopic.php?t=167
http://www.dvbdream.org/forum/viewtopic.php?t=553
http://www.dvbdream.org/forum/viewtopic.php?t=551
http://www.dvbdream.org/forum/viewtopic.php?t=816
You can support those topics if it's important for you.
"SPACE= Stop Auto-Zapper
PAUSE = start (and stop) timeshifting
CTRL + SHIFT + LEFT = rewind (5%)
CTRL + SHIFT + RIGHT = forward (5%)
CTRL + SHIFT + UP = goto start
CTRL + SHIFT + DOWN = goto end (live)"
Timeshift is not perfect, few timeshift topics (suggestions and bugs):
http://www.dvbdream.org/forum/viewtopic.php?t=167
http://www.dvbdream.org/forum/viewtopic.php?t=553
http://www.dvbdream.org/forum/viewtopic.php?t=551
http://www.dvbdream.org/forum/viewtopic.php?t=816
You can support those topics if it's important for you.
Dreamer
-
- Just popping in
- Posts:8
- Joined:Wed May 09, 2007 4:09 pm
Thanks dreamer, I'll look up those threads and contribute my own experience.
I've noticed that once my timeshifter buffer fills up, I can only go to the start or the end. I can't rewind or fast forward anymore, not even by dragging the pointer.
I've noticed that once my timeshifter buffer fills up, I can only go to the start or the end. I can't rewind or fast forward anymore, not even by dragging the pointer.
HARDWARE:
Skystar 2 rev. 2.6b (driver 4.4.0.0)
Dishpro twin LNB (BEV 91 + 82)
AMD Athlon64 3200+
2 GB RAM
300 GB HDD
Nvidia GeForce 7600gs
Sony 55" HDTV (DVI to HDMI)
s/pdif audio
SOFTWARE:
Nvidia PureVideo codec
WinXP pro
MyTheatre 3.38
DVBDREAM 1.3c
Skystar 2 rev. 2.6b (driver 4.4.0.0)
Dishpro twin LNB (BEV 91 + 82)
AMD Athlon64 3200+
2 GB RAM
300 GB HDD
Nvidia GeForce 7600gs
Sony 55" HDTV (DVI to HDMI)
s/pdif audio
SOFTWARE:
Nvidia PureVideo codec
WinXP pro
MyTheatre 3.38
DVBDREAM 1.3c
Who is online
Users browsing this forum: No registered users and 1 guest