DVBdream not able to save more than 4 satellites.

[ddywz]

I scanned the 5th satellite and all channels and transponders are ok. After exiting the program dhe 5th satellite disapears from the list. The other 4 remain and are fine. Any idea why?

Thanks,

[saentist]

7w 5w 4w 1w 4.8e 7e
without any problem

[jerryt]

I scanned the 5th satellite and all channels and transponders are ok. After exiting the program dhe 5th satellite disapears from the list. The other 4 remain and are fine. Any idea why?

Thanks,

Could you post some screen shots, because I don't have any ideas with the little information you have provided.

I am interested in how you configured these satellites and what the 5th satellite shares with the other four? Port? Transponder file?

[ddywz]

Sorry for my late reply. Well, not sure what screen shots you are asking but here is my setup. I use Diseqc switch type v1.0 or v2.0. on software setting and use a SAR411 Span 4x1 hardware. I have Echostar 7 on port1 Echostar8.10 and Telestar5 on port2 and Nimiq1 and Nimiq2 on port3. I use 3 spaun 5x8 multiswitches and use tone 0-22k on software to select between two sats in the same diseqc port. Currently I have another SAR411 with same setup connected on 2nd output ports of 5x8 multiswitches connecting a DM7020s receiver that works with no problem on all 5 sats. DVBdream works fine with all 5 of them but like I said once I exit the program and start it back Telestar5 on port2 disapears from the list of satellites. I have to rescan again so I can have its transponders available for viewing.

This is strange and I cannot think of anything as of how to resolve this.

THanks,

[jerryt]

I would delete both satellites on that port and add them back.

If that does not work, post in bug reports.

[ddywz]

I am able to delete all satellites from the diseqc menu but when I go back to diseqc I see them back. So I am unable to delete any of the satellites from my configuration. I tried to exit out the DVB dream alltogether and launch it back but the satellites remain from the old configuration. I will uninstall it and reinstall it back to see if the behaviour will change.

thanks,

[ddywz]

Uninstalling and re-installing DVB dream resolved the issue. Now The 5 satellites are fine.

Thanks for your help,