BDA_ALL - Interface / latest revision

[PortalPete]

Ok thanks for the info. Got it to go now. Seems it was a screwed up registry. Did a restore and everything is fine

[nemencionavarro]

Is anyone using a GeniaTech USB Satbox? I've got it working somewhat but with no Diseqc capability and not getting all the channels. I am a newbie to DD and just starting to experiment. Thanks for any help.

[genericdude]

Hey Scanman. Is there any chance of updating this driver to support the Twinhan 1027 / Azurewave AD-SP 200?

I tried the 1.08 version but it was a no go.

Thanks,

[nemencionavarro]

Hey Scanman. Is there any chance of updating this driver to support the Twinhan 1027 / Azurewave AD-SP 200?

I tried the 1.08 version but it was a no go.

Thanks,

Scanman, ditto for Geniatech USB Satbox. Thanks.

[placebos]

Great Work ScanMan ...But I wonder when will we be able to find a new BDA *.dev file for Kworld DVBs 100 cards ?
it uses Conexant 2388 chip as most recent cards, but it doesn't support diseqc control with DD

the card works only with the first port on the switch and that's it


Thank you in advance

[ScanMan]

I'm working again to get some additional cards work with the next release 1.1.0. - Haupaauge cards should work now but it must be tested by several people because i don't own such a hardware.
Some bugs are fixed and at the moment i improved the speed for channel-change a little bit.
A beta will come out the next days....

@nemencionavarro
... should work with 1.08. What exactly did NOT work ?

SkyStar HD2:
Seems to be an identical card to 1041 / AD_SP 400 but several users in german forum told that i will NOT work with newest TwinHan-BDA-driver 1.1.0.300 ! There must be an electrical difference between them.

[nemencionavarro]

ScanMan, Thanks for replying. I will re-visit my set up again and tonight and test, then I will document and report of my results. Thanks again.

[nemencionavarro]

Scanman, I did test BDA-ALL 1.08 and it still apeasrs not a "GO" with my Geniatech USB Satbox. 1) I still could not scan Port 2 on Diseqc - it always scanned Port 1. 2) After scanning with the "few" channels found, the signal and quality indicators fluctuated wildly from 0 to 42 and 0 to 100, respectively, hence the picture pixelated badly and sound garbled.

I switched back to BDA, still no Diseqc capable switching, but at least got all the channels and level/quality remained stable, the picture clear and watch'able.

Thanks again and I will continue to test if you have any updates.

[ugo1]

I'm working again to get some additional cards work with the next release 1.1.0. - Haupaauge cards should work now but it must be tested by several people because i don't own such a hardware.
Some bugs are fixed and at the moment i improved the speed for channel-change a little bit.
A beta will come out the next days....

@nemencionavarro
... should work with 1.08. What exactly did NOT work ?

SkyStar HD2:
Seems to be an identical card to 1041 / AD_SP 400 but several users in german forum told that i will NOT work with newest TwinHan-BDA-driver 1.1.0.300 ! There must be an electrical difference between them.

Hi Scanman

The situation of the SkyStar HD2 is funny.

I bought it at the start of January and it arrived without drivers. the only driver that can be found online (also today) are in a page of an Italian shop and are TwinHan-BDA-driver rebranded (I don't add the link because I don't know if I can). If you see a my above in this topic you can find some log file of the DBA device. The problem I have is that DVBdream is unable to take the channel parameters the signal level and the signal quality work.

Regards

Ugo

[ScanMan]

You can try this driver for TH 1034/1041 (537KB):
http://www.digitalrise.biz/support/down ... ile&id=208

Signal & Level display:
Curious - this is a standard BDA-function and should work on every ( ! ) BDA-Driver.
I noticed, that some cars/boxes only deliver quality in correct level - signal sometimes is always 100% or zero. That must NOT automatically be an error.
But i haven't see them flickering yet ....

[Perez]

I'm working again to get some additional cards work with the next release 1.1.0. - Haupaauge cards should work now but it must be tested by several people because i don't own such a hardware.

Hi ScanMan,

I may test it. I have a Hauppauge Nova S2 HD card.


Perez.

[Perez]

I'm working again to get some additional cards work with the next release 1.1.0. - Haupaauge cards should work now but it must be tested by several people because i don't own such a hardware.

I tried the 1.1.0 beta driver
I'm sorry to inform you that my Hauppauge NovaS2HD still doesn't work!
As the same thing happens as with the 1.0.8: it doesn't tune on HD channels (anixehd on astra) and the Diseq switching still not working.

Perez

[doddyf]

Hi all,

I'm newbie I just install the latest version dvbdrem but I can't get it to work with my hauppauge nova-s plus card I got no singal at all I been read all the tutorial but still no luck may be I need the correct device driver for my card anyone can point me to the right on please I appriciate if your guys can help me on this.

[JerryPL]

Hi!
I got Pinnacle pctv 7010ix. It`s possible to run this card with the best software for TV SAT DVBDream?.
I was trying BDA (BDA_ALL_107_by_ScanMan) but nothing happen.
I had before SkyStar II, but sold it. DVBDream was working fine with SS2.

What can i do to run my new card under DVBDream?.

Thank`s a lot for any help!

[Maudit]

thanks, i am so happy!, now my pinnacle dazzle works great! omg!