REALTEK DTV USB 2832U vs Windows 1909

[Dreamer]

This tuner doesn't work right after updating Windows from 1809 to 1909.

I tried restart, manual driver reinstall, removing the tuner for few seconds, other renderers.

It doesn't work also in other DVB programs.

Is there any way how to fix this?

Another tuner (AVerMedia H777 Hybrid DVB-T) works good.

DVB Dream v3.7.1, REALTEK DTV USB, DVB-T/T2/(C?) / REALTEK 2832U, Windows 10 Home 64-bit 1909.

[Dreamer]

OK, so after uninstalling device in Device Manager and selecting "Scan for hardware changes" Windows installed the driver automatically and the tuner works good.

[Dreamer]

So DD has frozen with this tuner and it's impossible to end task, even with a Task manager. I have this error dialog:

Code: Select all

Unable to terminate process

The operation could not be completed.

Access is denied.

It was working good with Win 1809 and official driver from CD.

EDIT: OK, another day it works good, perhaps restart was needed after the auto-installation.

Still testing...

[Dreamer]

OK, so PIP doesn't work at all, with the same settings, codecs, renderers as with another tuner, I tried also other codecs and renderers, PIP doesn't work at all, it's strange.

[Dreamer]

I found, that I had timeshift enabled, DD is crashing, it's closed without dialog after few minutes, again and again - and PIP doesn't work, only if timeshift RAM 1024 is enabled.

If timeshift is disabled, I have no crashes and PIP works good.