root's BDA Mantis DD driver

[r00t]

Try this one...

[mix74]

tried still crash on close

[Dreamer]

Still the same error dialogs, no such dialogs with Scanman's device. However NO crash on exit with any version of your device.

[r00t]

Still the same error dialogs, no such dialogs with Scanman's device. However NO crash on exit with any version of your device.
Error messages are from my driver.
You can try the latest S2 driver (1.1.2.101) - that's what I'm using and get no errors on DD start.
Also try running dream.exe > log.txt from cmd, then upload/pm me the log file.

[mix74]

I tried last beta drivers (1.1.2.101) but i have still same problem on close.
I tried to use dvbdream without plugins but i have same problem on close.

Sorry for disturb and my bad english.

[friki100]

hi
your driver produces more packet losses than BDA driver
if I start Mantis-Driver, it will induce packet losses every 30 seconds (10 aprox.)
if I change to BDA driver, it won't produce any
why?

P.S: I don't connect power supply
P.S.2: when I change view to renderless or renderless to view or begin to record, induce packet losses. This problem is generated by my pc ¿?¿? Don't happen with my Pinnacle PCTV Sat/DVBT cards

regards

[r00t]

No idea, but no one else had similar problem, so it's probably some problem with your hardware or software... who knows.
Juse use BDA driver then if it works better for you...

P.S: I don't connect power supply
Why? The SS HD2 card needs more power and it may damage your motherbord or itself if you don't do so.

[friki100]

Because I didn't have any cable -__-"

Today I have connected power supply and SS produces same problem with power supply.

Signal: 60% Astra 19.2E

P.S.: DVB-S2 channels works fine. No packet losses o.O

EDIT: your driver work fine in DD 1.4i. In DD 1.5e, problems o.O
I have checked this packet losses. In according to ProjectX, this errors are trust.

[mix74]

Hello again root

In testing...
Windows 7
DVBDream ver 1.5c
Terratec Cinergy S2 CI with 1.01.01.901
no diseqc
Work perfect

same configuration with diseqc 1.0 or 2.0

"Error at "diseqc send", code 8007001F"

Then it works good.

Ty and sorry 4disturb

[amer1]

Please I want to BDA card AzureWave TWINHAN AD-SP 410

[r00t]

First post updated with new version.

Attached are latest 1.1.2.501 drivers for SS2HD (Thx Terratec!)

EDIT: For some reason this driver doesn't want to tune DVB-S2 channels... investigating it

[The_SMB]

hi

I've tried it with my Skystar HD2 at driver 1.3 from technisat website

the same error
"Error at "diseqc send", code 8007001F"

thank you

[friki100]

hi

I've tried it with my Skystar HD2 at driver 1.3 from technisat website

the same error
"Error at "diseqc send", code 8007001F"

thank you

same error for me

[usman125]

FEC values. Windows device driver uses same routines as Linux one (google it if you want to see source
code) and it should be able to autodetect 16APSK signals. However this fails for some reason and after few seconds
with signal (but no decoded stream data) it fails. This is probably bug in the driver and hopefully will be resolved as this
modulation gets more widely used.
- CI slot - I don't have CI