Page 1 of 2

Latest BDA interface (06.05.2009)

Posted: Tue May 05, 2009 5:45 pm
by rel
Changes since DD v1.4i:

- Diseqc switch support for Creatix/CTS added
- TeVii S630 & S660 support added
- DVBWorld DVB-S2 bug fixed
- DVBWorld remote controls are now supported


extract and copy bda.dev into DVB Dream \devices folder. (overwrite)

please test & report problems.

*file removed, please install v1.5x*

Posted: Wed May 06, 2009 6:06 am
by oMikR0n
I got Skystar HD (aka Technotrend S2-3200) and i tried this in windows 7 x64. When i click start in devices, dvbdream hangs and it needs to end task.

Posted: Wed May 06, 2009 11:35 am
by rel
I got Skystar HD (aka Technotrend S2-3200) and i tried this in windows 7 x64. When i click start in devices, dvbdream hangs and it needs to end task.
tested on Vista 64 and XP 32 here without any problems. I dont know what causes that on Windows 7 beta. Please send me your bda.log (in devices folder) and dvbdream.log (in root folder) files. (you can attach them here on forum post) Does it always happen or rarely ?

Posted: Wed May 06, 2009 11:40 am
by HAWKHAWK
Rel, again thx, great work. This v2.4 BDA driver works perfectly with my Medion/Creatix/CTX/Philips 7231 DVB-S/T card.

Diseqc works good now with my Technisat Multytenne Twin, so I can watch 4000 channels now :)

Posted: Wed May 06, 2009 12:23 pm
by Spider
Tested with Tevii S650 on XP 32. At scanning transpoders the error if on a transpoder there is no signal drops out. Also could not get positioner. Did not try RAW a command.

sorry for my english.

Posted: Wed May 06, 2009 1:50 pm
by oMikR0n
I got Skystar HD (aka Technotrend S2-3200) and i tried this in windows 7 x64. When i click start in devices, dvbdream hangs and it needs to end task.
tested on Vista 64 and XP 32 here without any problems. I dont know what causes that on Windows 7 beta. Please send me your bda.log (in devices folder) and dvbdream.log (in root folder) files. (you can attach them here on forum post) Does it always happen or rarely ?
Here:

Posted: Wed May 06, 2009 9:40 pm
by murad052
hi all
i have problem with last bda i thought this bda will help me and make my Diseqc works but it's not the program crash immediately when i try to open it
i have kworld 100 s-dvb card
i use windows xp sp3 and vista and the same thing the program crash

Posted: Thu May 07, 2009 9:42 am
by rel
I got Skystar HD (aka Technotrend S2-3200) and i tried this in windows 7 x64. When i click start in devices, dvbdream hangs and it needs to end task.
log files says you are using ScanMan's alternative bda interface "BDA_ALL 1.1.0". Not this bda.dev (you need to switch to bda 2.4 device)

Tested with Tevii S650 on XP 32. At scanning transpoders the error if on a transpoder there is no signal drops out. Also could not get positioner. Did not try RAW a command.

sorry for my english.
Tevii API doesnt have Raw diseqc / positioner support. So ask the manufacturer(company) for them.

hi all
i have problem with last bda i thought this bda will help me and make my Diseqc works but it's not the program crash immediately when i try to open it
i have kworld 100 s-dvb card
i use windows xp sp3 and vista and the same thing the program crash
KWorld is not supported. I need a device and their SDK (programming documentation) to support it on DD.

Posted: Thu May 07, 2009 8:17 pm
by murad052
HI AND THANX FOR FAST REPLY
FROM WHERE CAN I GET THE SDK FILE

I SEARCH IN DRIVER FOLDER AND NOTHUNG THERE
CAN U GIVE ME HELP IN THIS CUZ IAM REALY NEED DD CUZ OTHER PRO DRIVE ME CRAZY
OH MY THEATER AND DVB VIEWER SUPPORT THIS CARD MAYBE THIS INFO HELP U
IF THE DRIVE FOLDEER HELPS TAKE THIS LINK
AND AM VERY THANKFUL
ftp://ftp-us.kworld-global.com/driver/d ... 070622.zip

Posted: Wed May 13, 2009 11:56 pm
by murad052
any response tell me if want to try or i should forget the whole subject

Re: Latest BDA interface (06.05.2009)

Posted: Sat May 23, 2009 4:47 pm
by woojciech
error 12, winxp azureware (twinhan)

Re: Latest BDA interface (06.05.2009)

Posted: Mon May 25, 2009 6:35 pm
by reason
please test & report problems.
Thanks, I tested the it and it works fine. But I want to ask a question:
Can the BDA interface be modified to make it release the device regardless of how DD is closed. I mean like when DD is forced to close because of an error.
I'm asking about that because many times DD is forced to close without releasing the device of my Azurewave 1027, and that forces me to reboot in order to use the device again.
Thanks.

Posted: Mon Jun 01, 2009 9:44 am
by ScanMan
On Technotrend S2-3200 with driver 5.0.1.8:

- Tuning is really slow
- Locks on every channel
- ... but no video on H.264 channels.

A separate video-win is flickering shortly.

Re: Latest BDA interface (06.05.2009)

Posted: Tue Jun 09, 2009 12:55 am
by rel
please test & report problems.
Thanks, I tested the it and it works fine. But I want to ask a question:
Can the BDA interface be modified to make it release the device regardless of how DD is closed. I mean like when DD is forced to close because of an error.
I'm asking about that because many times DD is forced to close without releasing the device of my Azurewave 1027, and that forces me to reboot in order to use the device again.
Thanks.
done in upcoming v1.5

On Technotrend S2-3200 with driver 5.0.1.8:

- Tuning is really slow
- Locks on every channel
- ... but no video on H.264 channels.

A separate video-win is flickering shortly.
not sure what is the cure for slow tuning.

Posted: Wed Jun 24, 2009 12:32 pm
by shtiger
hi all

sorry for My English is weak

I got Tevii S420 and i used this in windows 7

My problem with last bda i thought this bda will help me and make my Diseqc works on 4 Satellite ,But when the searches for the four satellites and satellite frequencies Izarli one

why :?