Cannot scan with dvbdream

General discussion . (Do not post bug reports or feature requests in this section!)

Moderators:X05, Dreamer, FredB

dm-_bobjr
Posts:2
Joined:Wed Nov 14, 2007 7:52 pm
Cannot scan with dvbdream

Postby dm-_bobjr » Wed Nov 14, 2007 8:14 pm

I am having trouble scanning with dvbdream. I have the BDA drivers installed for my twinhan 1020a. When ever I go to scan, the computer freezes and I have to restart. I have tried scanman's bda driver, but I have not had success with that. Whenever I go to scan, it starts for a brief second, then I get the infamous blue screen and the computer restarts. Any help on how to get around this would be greatly appreciated. Thanks
🌟 Recommended Tools & Services
Twinhan 1020a, gefroce 6600 gt, windows vista 32 bit.
User avatar
GrEaTwArRiOr
Just can't stay away
Posts:34
Joined:Wed Jan 17, 2007 6:25 am

Postby GrEaTwArRiOr » Thu Nov 15, 2007 7:02 am

mate don't use bda driver use Twinhan WDM driver it comes with your card CD...

i hope its help

regards,
Gr
TheKrell
Home away from home
Posts:65
Joined:Wed Aug 08, 2007 1:30 pm
Location:Fairfax, VA

Postby TheKrell » Thu Nov 15, 2007 11:13 am

DD 1.4 scans nicely with my 1025 using the Twinhan BDA v.1.2.3.8 (2006. 05) drivers. I believe this is the same driver as your card uses.

I tried the WDM driver once on DD 1.3c, but I don't remember what happened. (Whatever it did, it wasn't better than the 1.2.3.8 driver!) I definitely went back to the BDA driver.

I had the same experience as you using ScanMan's BDA interface, except I didn't get a blue screen. Just the POST all of a sudden.
Twinhan 1025 DishPro LNB DP34 switch Echostar satellites at 119, 110, 61.5
dm-_bobjr
Posts:2
Joined:Wed Nov 14, 2007 7:52 pm

Postby dm-_bobjr » Thu Nov 15, 2007 5:03 pm

I did the above things and I encounter the other problem I am having. Just for reference, I have the device as the twinhan direct device. I set the lnb to na legacy at 11250000. I go to manual scan and scan 12239 Mhz on echo 7. I get 67% signal and 98% quality. However, the scan will detect no channels. When I do an automatic scan, I get signal, but no channels. Any thoughts?
Twinhan 1020a, gefroce 6600 gt, windows vista 32 bit.
dizzymon
Just popping in
Posts:8
Joined:Tue Nov 13, 2007 9:45 am

Postby dizzymon » Fri Nov 16, 2007 4:01 pm

I did the above things and I encounter the other problem I am having. Just for reference, I have the device as the twinhan direct device. I set the lnb to na legacy at 11250000. I go to manual scan and scan 12239 Mhz on echo 7. I get 67% signal and 98% quality. However, the scan will detect no channels. When I do an automatic scan, I get signal, but no channels. Any thoughts?
Reinstall your drivers for your dvb-s card.
Shuttle XPC SS56L /XP Pro SP2 - P4 2.4GHz Celeron 1GB Ram - 128mb Nvidia FX5500 - Pure nVidia/nVidia/Intervideo - DD v1.4d - SS2 v4.4.1 - DVI to HDMI

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest