WandTV USB DVB-T

General discussion . (Do not post bug reports or feature requests in this section!)

Moderators:X05, Dreamer, FredB

Post Reply
xiscoj
Just popping in
Posts:3
Joined:Fri Aug 08, 2008 4:05 am
WandTV USB DVB-T

Postby xiscoj » Fri Aug 08, 2008 4:14 am

Hi.
I've tried this card with dvbdream 1.4i and with the standar BDA drivers it gets the channels sintonized with another program and duplicate them each time it finds signal, so I get 48 channels but they are all the same 4.
The card is
USB V2.0 (Real V2.0) WandTV DVB-T Stick
*Chipset : AF9015 (Taiwan)
With BDA_ALL2008_06_14b, the program has signal in the channels but says that they are empty.
Attached is my BDA_all.LOG
Any idea or anyone with the same card working?

Thanks.
Last edited by xiscoj on Fri Aug 08, 2008 8:53 am, edited 1 time in total.
Wandtv Dvb-T Stick
*Chipset : Probably E3C 168
*Full channel and territory autoscan (6/7/8 MHz)
Top
xiscoj
Just popping in
Posts:3
Joined:Fri Aug 08, 2008 4:05 am

Postby xiscoj » Fri Aug 08, 2008 7:14 am

I've been searching and seems that the chipset is an E3C 168 and not and AF9015, sorry.
Wandtv Dvb-T Stick
*Chipset : Probably E3C 168
*Full channel and territory autoscan (6/7/8 MHz)
Top
xiscoj
Just popping in
Posts:3
Joined:Fri Aug 08, 2008 4:05 am

Postby xiscoj » Fri Aug 08, 2008 8:55 am

Here is the log, I didn't attach it in the first post :(
Attachments
BDA_ALL.LOG.TXT
BDA_ALL.LOG
(17.39KiB)Downloaded 390 times
Wandtv Dvb-T Stick
*Chipset : Probably E3C 168
*Full channel and territory autoscan (6/7/8 MHz)
Top
Post Reply

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest