...I use all the listed motor types--non will move the dish. It shows the bar moving the motor, but motor still at the same position. I know it is something in a settings that I did wrong, but I can't figure out-what? No switch connected, using only positioner settings--My Theatre moves the dish. Any inputs ?Stab HH120 no go...
Moderators:X05, Dreamer, FredB
...I use all the listed motor types--non will move the dish. It shows the bar moving the motor, but motor still at the same position. I know it is something in a settings that I did wrong, but I can't figure out-what? No switch connected, using only positioner settings--My Theatre moves the dish. Any inputs ?Twinhan 1027 on p4 intel 3.4 board
I can' belive this...
... nobody has any input on the issue!? Comon I now there are smart people here!
I tried ScanMan's BDA_ALL -- do not work.
I tried ScanMan's BDA_ALL -- do not work.
Twinhan 1027 on p4 intel 3.4 board
Have you read this: http://www.dvbdream.org/forum/viewtopic.php?t=1159 ?
What kind of chip the 1027 is using - BT878 ? If yes, you should try a WDM-Driver (2.608a) and then select ThinHan-SDK.
ScanMan
What kind of chip the 1027 is using - BT878 ? If yes, you should try a WDM-Driver (2.608a) and then select ThinHan-SDK.
ScanMan.
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
Have you had any kind of success ?
.
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
Hi ScanMan
I also have a Stab HH 120, I used to use ProgDVB and dixie which works fine with my satcard. But i wont use anything other than Dvb Dream
it is the best software out there, stable fast and user friendly
I looked at you link and made the changes you suggested but i still cant get it it to work. I will try some more settings and post my results
I also have a Stab HH 120, I used to use ProgDVB and dixie which works fine with my satcard. But i wont use anything other than Dvb Dream
it is the best software out there, stable fast and user friendly I looked at you link and made the changes you suggested but i still cant get it it to work. I will try some more settings and post my results
Happauge WinTV-Nova-HD-S2 - DD1.4h - bda_20080301_6
- Drivers NOVA-HVR-CD40a2 - Driver version 2 2.119.25023.0 - remote + wtvirbridge
HTPC - WinXP SP2 - AMD 3800 X2 939 - 1GB DDR2
$20 Donated to DVBDream. Support DVBdream and donate some $
- Drivers NOVA-HVR-CD40a2 - Driver version 2 2.119.25023.0 - remote + wtvirbridge
HTPC - WinXP SP2 - AMD 3800 X2 939 - 1GB DDR2
$20 Donated to DVBDream. Support DVBdream and donate some $
Who is online
Users browsing this forum: Bing [Bot] and 1 guest