Page 1 of 1
Diseqc 4x1 is killing me
Posted: Sun Apr 01, 2007 1:34 pm
by Nrmf
seems that i get a lot of chops or stutters and don't get complete channel scans on one tv, the other tv works just fine witha disqec 4x1 is there something else i can use besides these disqecs that seem to be sensitive.
Posted: Mon Apr 09, 2007 5:44 pm
by jerryt
Tone switch 22KHZ or you could try this, diseqc switch modification;
http://myfreefilehosting.com/f/ba85a851be_2.48MB
Posted: Mon Apr 09, 2007 7:20 pm
by Nrmf
i have 2 setups one in living room and this one in bedroom, the living room works like a champ but in bedroom it sucks, so i went into attic and switch the disqec that living room was using and put it on bedroom line did a freash channel scan and i get 231 channels of the same channel...man this is driving me nuts
Posted: Mon Apr 09, 2007 7:32 pm
by Nrmf
to turn on tone, its greyed out what do i do
Posted: Mon Apr 09, 2007 8:37 pm
by jerryt
to turn on tone, its greyed out what do i do
Lof Sw = 11700000 tone on
Lof SW = 12700000 Tone off
Posted: Mon Apr 09, 2007 9:16 pm
by Nrmf
anyway to do without a disqec is there some kind of other switch i can use that might be better. looks like i have a bad disqec
Posted: Tue Apr 10, 2007 9:28 am
by jerryt
A tone switch is not a diseqc switch. So if diseqc switch is giving you problems, and you only need two ports, tone switches are great.
Posted: Tue Apr 10, 2007 5:38 pm
by Nrmf
can i get away from using disqec, do i have any other options
Posted: Tue Apr 10, 2007 5:39 pm
by Nrmf
i have a dual lnb with built in sw21 can i use that instead of disqec