Diseqc 4x1 is killing me

General discussion . (Do not post bug reports or feature requests in this section!)

Moderators:X05, Dreamer, FredB

Nrmf
Home away from home
Posts:51
Joined:Sat Jun 17, 2006 7:27 pm
Diseqc 4x1 is killing me

Postby Nrmf » Sun Apr 01, 2007 1:34 pm

seems that i get a lot of chops or stutters and don't get complete channel scans on one tv, the other tv works just fine witha disqec 4x1 is there something else i can use besides these disqecs that seem to be sensitive.
Twinhan VP1025 Red
Driver 2.4.1.1
WinXP Pro SP2 512M Ram
AMD Sempron 2600 64 CPU
1 Dish-110-119 4 Port disqec
Matrox P650 64M
jerryt
love DVB Dream!
Posts:153
Joined:Mon Jun 19, 2006 11:15 am

Postby jerryt » Mon Apr 09, 2007 5:44 pm

Tone switch 22KHZ or you could try this, diseqc switch modification;
http://myfreefilehosting.com/f/ba85a851be_2.48MB
Twinhan 1020a driver 2.4.1.1, Skystar2 2.3 driver 4.4.0, Genpix USB, T90 and SG2100 w QPH-031.
Nrmf
Home away from home
Posts:51
Joined:Sat Jun 17, 2006 7:27 pm

Postby Nrmf » Mon Apr 09, 2007 7:20 pm

i have 2 setups one in living room and this one in bedroom, the living room works like a champ but in bedroom it sucks, so i went into attic and switch the disqec that living room was using and put it on bedroom line did a freash channel scan and i get 231 channels of the same channel...man this is driving me nuts
Twinhan VP1025 Red
Driver 2.4.1.1
WinXP Pro SP2 512M Ram
AMD Sempron 2600 64 CPU
1 Dish-110-119 4 Port disqec
Matrox P650 64M
Nrmf
Home away from home
Posts:51
Joined:Sat Jun 17, 2006 7:27 pm

Postby Nrmf » Mon Apr 09, 2007 7:32 pm

to turn on tone, its greyed out what do i do
Twinhan VP1025 Red
Driver 2.4.1.1
WinXP Pro SP2 512M Ram
AMD Sempron 2600 64 CPU
1 Dish-110-119 4 Port disqec
Matrox P650 64M
jerryt
love DVB Dream!
Posts:153
Joined:Mon Jun 19, 2006 11:15 am

Postby jerryt » Mon Apr 09, 2007 8:37 pm

to turn on tone, its greyed out what do i do
Lof Sw = 11700000 tone on
Lof SW = 12700000 Tone off
Twinhan 1020a driver 2.4.1.1, Skystar2 2.3 driver 4.4.0, Genpix USB, T90 and SG2100 w QPH-031.
Nrmf
Home away from home
Posts:51
Joined:Sat Jun 17, 2006 7:27 pm

Postby Nrmf » Mon Apr 09, 2007 9:16 pm

anyway to do without a disqec is there some kind of other switch i can use that might be better. looks like i have a bad disqec
Twinhan VP1025 Red
Driver 2.4.1.1
WinXP Pro SP2 512M Ram
AMD Sempron 2600 64 CPU
1 Dish-110-119 4 Port disqec
Matrox P650 64M
jerryt
love DVB Dream!
Posts:153
Joined:Mon Jun 19, 2006 11:15 am

Postby jerryt » Tue Apr 10, 2007 9:28 am

A tone switch is not a diseqc switch. So if diseqc switch is giving you problems, and you only need two ports, tone switches are great.
Twinhan 1020a driver 2.4.1.1, Skystar2 2.3 driver 4.4.0, Genpix USB, T90 and SG2100 w QPH-031.
Nrmf
Home away from home
Posts:51
Joined:Sat Jun 17, 2006 7:27 pm

Postby Nrmf » Tue Apr 10, 2007 5:38 pm

can i get away from using disqec, do i have any other options
Twinhan VP1025 Red
Driver 2.4.1.1
WinXP Pro SP2 512M Ram
AMD Sempron 2600 64 CPU
1 Dish-110-119 4 Port disqec
Matrox P650 64M
Nrmf
Home away from home
Posts:51
Joined:Sat Jun 17, 2006 7:27 pm

Postby Nrmf » Tue Apr 10, 2007 5:39 pm

i have a dual lnb with built in sw21 can i use that instead of disqec
Twinhan VP1025 Red
Driver 2.4.1.1
WinXP Pro SP2 512M Ram
AMD Sempron 2600 64 CPU
1 Dish-110-119 4 Port disqec
Matrox P650 64M

Return to “General”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest