Bda driver for medion 8800?

[pacobar]

The BDA implementation of dd 1.3 support md8800 (dual SAA 7131 chip)? if so, how? if don´t are you planning in the near future?

[tomt]

DD works well with the MD8800.

See this forum for more details:

http://www.medionsupport.com

[HAWKHAWK]

DVBDream works ok for one sat on the Medion PCs. But the real question is if it supports also diseqc from DVBDream.

I looked on a lot of fora now, als of Medion, but nobody seems to have the diseqc working for the (in EU very common) Creatix CTX sat cards.

What to do to let this work?

TIA

[genpix]

But the real question is if it supports also diseqc from DVBDream.

1) stop posting the same questions in multiple section. It's annoying.
2) read about BDA standard (google is your friend). BDA standard does not include diseqc protocol.
3) contact you DVB card manufacturer and ask about SDK for that card. Particularly, ask how to call diseqc functions.

[HAWKHAWK]

But the real question is if it supports also diseqc from DVBDream.

1) stop posting the same questions in multiple section. It's annoying.
2) read about BDA standard (google is your friend). BDA standard does not include diseqc protocol.
3) contact you DVB card manufacturer and ask about SDK for that card. Particularly, ask how to call diseqc functions.

Thx for your reply. Of course I googled a lot about this subject, and I know that standard BDA does not support diseqc. The question remains: does anybody here has DVBDream/diseqc working with the Creatix/CTX/Philips/Medion sat card? It is a very common card/chip vendor here, but before we start developing on the SDK (if any) it might be good to know if it was done before. It seems to work with MyTheatre, but that is another forum

BTW: I use a Technisat Multytenne twin, with 4 LNBs (and 2 outputs).

TIA

best regards from Holland

[HAWKHAWK]

Ok, some good news: there is a OEM version of Cyberlinks TV Enhance installed on the Medion, and yes: this one can scan ALL 4 SATs (13/19,2/23,5/28,3) from my Multytenne and I can view all channels founds accross these different SATs. This means that my antenne setup is ok, and the DVB-S card must support (some kind of) diseqc.

The only remaining question is: how to let DVBDream support this too so I can use DVBDream (and DVBSbridge to MCE!) to watch multiple SATs too?

How can I supply more data for the developers here to make a specific (BDA) driver for this Creatix/CTX card?

regards

BTW: TV Enhance is from Cyberlink, look here: http://docs.cyberlink.com/english/techn ... /index.jsp