Genpix firmware 2.x - DVBDream fails to initialize hardware

[owlish]

Not sure if this is just my special case or anyone else is seeing this. Please share your experience with Genpix board and new firmware (2.x).

My board works fine with old firmware with either TSR Lite or DD1.1h+old_driver.

Upgrading to 2.x firmware breaks it completely. DD will fail to initialize hardware. Verified on a separate 'virgin' PC with fresh install. Does not matter which driver is used (tried 1.2.0, 1.2.1, 1.2.2 shipped with DD1.3c). TSR Lite will fail to initialize the source as well.

Unfortunately, old driver does not work with newer DD and new driver does not work with old firmware and new firmware does not work with my board.

The log looks like no responce from the driver very early on (error -1). This looks like FW problem rather than DD, I just wanted to share and perhaps hear from other people with this HW.

[rel]

since genpix users are happy during the last months
I am moving this old post to "old posts" section