change audio pid = no sound in LAN Broadcasting

[arwa]

hello

i use vlc to recive the LAN Broadcasting stream

when i change channel audio pid i get no audio in vlc

can u plz help me

thanks

[FredB]

I presume that this only happens on encrypted channels when you change audio stream in VLC.

The only audio stream that is decrypted is the one that is selected in DD.

[arwa]

thanks for reply

but the sound work in DD not in vlc

also when i used MT it work fine with av plugin
but MT make the load 80% with this plugin

sorry im newbie at this stuff

[FredB]

You're right this happens also on FTA channels !!!

Very strange, it the first time I notice this behavior... I haven't encountered such issue on FTA channels during previous tests I've made some time ago.

I'll make further tests with previous releases of VLC.

[happyhammer]

New to DD but i also have this problem. i have english as my preferred language in DD and this is often the second language option for the channels i want to watch. I can record the channel and then play it in VLC which shows just one audio stream, but when i try to stream to VLC no sound and VLC typically,as an example, shows stream0=video, stream1=spanish,steam 2=english.

It looks like whenever there is a multilanguage audio option, you can only stream the first audio stream.

Could it be a bug in DD streaming? or is there some settings in VLC to rectify?

[rel]

there was probably a bug in v1.3c

in the upcoming v1.4 , if you switch audio pid, you must pick the right pid on the streaming client too. (for example, you must select the right audio track on the VLC), just tested.

if you need all audio pids to be streamed , please add a feature request.

[arwa]

thanks

[hema-star]

Hi all,
I have the suloation Arwa,ok folow this steps in Vlc:
1)after you get the channel on VLC .
2)form Vlc ___ Audio____Audio track____ then choose the languge you play on DD

if you streaming more than channel has multilanguge you have to Delete first the PID Languge you don't need first from the channel properites then do the same step 2

best wishes

[arwa]

there was probably a bug in v1.3c

in the upcoming v1.4 , if you switch audio pid, you must pick the right pid on the streaming client too. (for example, you must select the right audio track on the VLC), just tested.

if you need all audio pids to be streamed , please add a feature request.

how i can select the audio track on the vlc ?

[arwa]

find it
thanks work fine

[arwa]

hi

thanks for the new ver

in ver 1.4c , 1.4d

when i start stream from vlc it return to the default audio pid .. english

dd -> audio pid -> renderless mode "or vlc -> file -> open network -> change to my audio track "

when i try to transcoding it return to the first pid .. and we don't have sound

when i used 1.3 it work perfectly