I've been experimenting as we go along with 1.4.
1.4E was a little unstable, crashing sometimes.
1.4F is very very crashy, and always crashes when trying to listen to most audio channels from dishn**.
Tried re-installing.
1.4F always crashes on channel change and audio channels
Moderators:X05, Dreamer, FredB
- Rockin' Rick
- Home away from home
- Posts:64
- Joined:Mon Jun 19, 2006 9:50 am
- Location:At the keyboard
Twinahn 1020A, WinXP Pro, Dual Athlon 1800, 3 meter C/Ku dish and toroidal Ku dish.
I am listening to channel 977 right now.
I have not observed a crash of 1.4f. Some obvious differences between your setup and mine:
Also, I did not go directly to 1.4f but instead first installed the patch to 1.4e. Let me add that I could not get 1.4f to run at all until I deleted dvbepg.ini. The pop-up informing me that my dvbepg ini file was too old could not be dismissed!

Code: Select all
Me You
----------------------
1025 1020a
W2K XP
1 CPU dual
Twinhan 1025 DishPro LNB DP34 switch Echostar satellites at 119, 110, 61.5
- GrEaTwArRiOr
- Just can't stay away
- Posts:34
- Joined:Wed Jan 17, 2007 6:25 am
no way mate i am running my machine 11hrs 36m and still running....there is no single crash
i am using some plugin also may be something wrong with your codec it is possible
@Mr rel thanks for your all hard work mate da**, you did it again
thanks and regards,
Gr

i am using some plugin also may be something wrong with your codec it is possible
@Mr rel thanks for your all hard work mate da**, you did it again

thanks and regards,
Gr
Twinhan 1020A WDM Driver
Nilesat 101/102 & Atlantic Bird 4 at 7.0°W
Pentium4 3.2Ghz, 1 GB RAM, ATI 256MB Graphic Card, 120GB Sata HD
Nilesat 101/102 & Atlantic Bird 4 at 7.0°W
Pentium4 3.2Ghz, 1 GB RAM, ATI 256MB Graphic Card, 120GB Sata HD
- Rockin' Rick
- Home away from home
- Posts:64
- Joined:Mon Jun 19, 2006 9:50 am
- Location:At the keyboard
I don't know. Same codecs and settings I always use.
Double checked.
Reinstalled into new folder.
1.3 ran quite well, would run for days, even weeks with no trouble.
The first few 1.4 releases worked alright.
The last two have been unusable for me.
Maybe it's my hardware arguing with the latest ddsource.
On a video channel it crashes after a few minutes, 6000's audio channels it crashes immediately.
Trying it with no plugins or modules, so far it's better.
But I've just copied everything from one version to the next, works in 1.3 but not 1.4.
Okay, running with no plugins, only module is DVBEPG, same trouble. This time instead of crashing it just closed.
With a plugin, and without any modules, I get an error, but the DD continues to run.
Double checked.
Reinstalled into new folder.
1.3 ran quite well, would run for days, even weeks with no trouble.
The first few 1.4 releases worked alright.
The last two have been unusable for me.
Maybe it's my hardware arguing with the latest ddsource.
On a video channel it crashes after a few minutes, 6000's audio channels it crashes immediately.
Trying it with no plugins or modules, so far it's better.
But I've just copied everything from one version to the next, works in 1.3 but not 1.4.
Okay, running with no plugins, only module is DVBEPG, same trouble. This time instead of crashing it just closed.
With a plugin, and without any modules, I get an error, but the DD continues to run.
- Attachments
-
- Eureka_log.txt
- (56.57KiB)Downloaded 606 times
Twinahn 1020A, WinXP Pro, Dual Athlon 1800, 3 meter C/Ku dish and toroidal Ku dish.
1.4d is better for me
1.4f gives me dvbepg ini might cause problems and just hangs. When I finally cleared out the INI I can't scan anything so I just reinstalled 1.4d and it works just fine. So is DVBEPG not working at all with 1.4f?
Shuttle XPC SS56L /XP Pro SP2 - P4 2.4GHz Celeron 1GB Ram - 128mb Nvidia FX5500 - Pure nVidia/nVidia/Intervideo - DD v1.4d - SS2 v4.4.1 - DVI to HDMI
- Rockin' Rick
- Home away from home
- Posts:64
- Joined:Mon Jun 19, 2006 9:50 am
- Location:At the keyboard
Installed 1.4G on top of F, all good.
Been running for about 10 hours, plugins and modules as I see fit, running DVBEPG, my choice of codecs, no jitter, no losses, a few resets, smooth as glass. Favorite audio channels are working too.
I could not get 1.4F and DVBEPG to play nice no matter what I tried to do.
Been running for about 10 hours, plugins and modules as I see fit, running DVBEPG, my choice of codecs, no jitter, no losses, a few resets, smooth as glass. Favorite audio channels are working too.
I could not get 1.4F and DVBEPG to play nice no matter what I tried to do.
Twinahn 1020A, WinXP Pro, Dual Athlon 1800, 3 meter C/Ku dish and toroidal Ku dish.
Still no scheduling capability
I still wish DVBEPG to be able to schedule recordings. Only watch and record now works.

Installed 1.4G on top of F, all good.
Been running for about 10 hours, plugins and modules as I see fit, running DVBEPG, my choice of codecs, no jitter, no losses, a few resets, smooth as glass. Favorite audio channels are working too.
I could not get 1.4F and DVBEPG to play nice no matter what I tried to do.
Shuttle XPC SS56L /XP Pro SP2 - P4 2.4GHz Celeron 1GB Ram - 128mb Nvidia FX5500 - Pure nVidia/nVidia/Intervideo - DD v1.4d - SS2 v4.4.1 - DVI to HDMI
Who is online
Users browsing this forum: Bing [Bot] and 1 guest