Twinhan 1027 / Azurewave AD-SP 200 setup and diseqc problems

[sunbeam]

Hi I am useing a Twin Haun 1027 and DVB Dream 1.4i and it is working fine for me for North Americna Satellites and a D.sh Pro system and a DP 34 switch and a Legasy adaptor. I am useing diseq 1.0/2.0 and useing frequencys KU Linier (Universal) Lo Fq 1 9750000, Low Fq. Switch 11700000, and Low Fq. 2 11250000. I have to use the DP adapter because My Twinhaun cannot change the sats in my DP 34 switch without it. The frequency settings are for sats 119 and 110 echo star. Hope this helps.

[hellmonger]

great post sunbeam

i had a feeling it was a power problem it worx fine with my theatre with is a crapy prog
my level and quality are alwase higher with my theatre must be voltage seetings in dvbd

rel what do you need to fix this?

[kailm]

I also run twinhan 1027 on mytheater without diseqc problems.
It switches fine in MT, just doesnt do it in dvdbdream.

I have been watching this thread for sometime, hoping for a solution.

[getstarted]

I copied the attached bda driver from the second page of the thread, but i am getting "Cannot Initialize DVB Hardware.." error. Any idea why i am getting?

MT is working okay(atleast able to scan few channels). Thanks,

[hellmonger]

comon rel do somthing man i f***/g h8te MT

what do you need man a card il send you one

[gonzo1978]

Hi I am useing a Twin Haun 1027 and DVB Dream 1.4i and it is working fine for me for North Americna Satellites and a D.sh Pro system and a DP 34 switch and a Legasy adaptor. I am useing diseq 1.0/2.0 and useing frequencys KU Linier (Universal) Lo Fq 1 9750000, Low Fq. Switch 11700000, and Low Fq. 2 11250000. I have to use the DP adapter because My Twinhaun cannot change the sats in my DP 34 switch without it. The frequency settings are for sats 119 and 110 echo star. Hope this helps.

what is legasy adaptor? is it extra power suply used for example for sw64

[gonzo1978]

Hi I am useing a Twin Haun 1027 and DVB Dream 1.4i and it is working fine for me for North Americna Satellites and a D.sh Pro system and a DP 34 switch and a Legasy adaptor. I am useing diseq 1.0/2.0 and useing frequencys KU Linier (Universal) Lo Fq 1 9750000, Low Fq. Switch 11700000, and Low Fq. 2 11250000. I have to use the DP adapter because My Twinhaun cannot change the sats in my DP 34 switch without it. The frequency settings are for sats 119 and 110 echo star. Hope this helps.

what is legasy adaptor? is it extra power suply used for example for sw64

[gonzo1978]

Hi I am useing a Twin Haun 1027 and DVB Dream 1.4i and it is working fine for me for North Americna Satellites and a D.sh Pro system and a DP 34 switch and a Legasy adaptor. I am useing diseq 1.0/2.0 and useing frequencys KU Linier (Universal) Lo Fq 1 9750000, Low Fq. Switch 11700000, and Low Fq. 2 11250000. I have to use the DP adapter because My Twinhaun cannot change the sats in my DP 34 switch without it. The frequency settings are for sats 119 and 110 echo star. Hope this helps.

what is legasy adaptor? is it extra power suply used for example for sw64

[aalsaqqa]

hi rel

this is may help solving this problem

first i have that twinhan 1027

the diseqc wokes fine in progdvb

and i have two lnb's hot bird on the port1 and nilesat on port4

when i want to watch for the chanels on nilesat i have to put on a nilesat channel on progdvb and close it

then the dvbdream just have the nilesat

and the hotbird too