Please help with diseq settings

[crak]

I am new to dvbpci world but not to fta. I own a Viewsat extreme, captive works 600s and a pansat 3500. I have spent countless hours in the last 5 days trying to get a good scan of the sats. I have a dishpro 500 for 119 and 110 and an old dtv 3lnb oval dish for Nimiq 82 (hd), use to be for 91.
I am using a diseq 4x1 with 119/110 in 1 and 82 in 2.
Every time I scan 119 and 110 it gets the same channels in each.
I cant even get a signal in 82
I will appreciate if somebody can help me with the diseq settings.

[dmz01]

You have to connect 110 and 119 to two separate inputs on your diseqc switch in order to switch between them. Do you have two separate LNBs for 110/119 or one big LNB? The big LNB has a build-in diseqc switch, and you can't cascade those with your additional diseqc switch.